Help with Wet Nitrous Timing Retard
05-29-2008, 08:38 PM
#1
12 Second Club
Thread Starter
iTrader: (9)
Join Date: Jun 2006
Location: Grand Forks, North Dakota
Posts: 1,051
Likes: 0
Received 0 Likes
on
0 Posts
Help with Wet Nitrous Timing Retard Take a look at my hpl scan file. On the WOT runs I have seen the g/cyl run from .28 up to like .40g/cyl. Which doesnt correspond with my high and low octane timing. If the numbers were doubled itd make sense.
The car has no MAF sensor and i think runs off the VE tables.
Long story short with no MAF do you still just adjust the high and low octane tables? Which part of the table?
I am thinking 2800rpm from .28g/cyl and down and to the right.
The car has no MAF sensor and i think runs off the VE tables.
Long story short with no MAF do you still just adjust the high and low octane tables? Which part of the table?
I am thinking 2800rpm from .28g/cyl and down and to the right.
