16again

iTrader: (1)

I just can't stop touching my Nitrous system. Today I decided since I don't race on the street (very rarely drive on street) I don't need the bottle within my reach. I have removed the bottle from where it was and will now mount it in the center compartment.
This will allow the bottle top to be sticking out and a lot easier to remove and install for refilling. Right now it needs to be loosened and removed from turning backwards in the drivers seat.

I am Gorilla gluing a piece of 3/4" MDF to the center compartment for the mounts. I won't be to the track for quite a while since they have just started the replacement of the local facility. Needless to say, I am not in any rush.

Looks like this now


Looking at something vaguely similar to Roberts install on his 97.

16again

iTrader: (1)

Alright so far I have moved the Nitrous line AND installed the MDF mounting platform AND the mounts. The purple cylinder is just for fitting purposes as it's empty.

16again

iTrader: (1)

Not as nice as Roberts but much better than when I started.

Started out like this.


Like this so far. I have detail work to do yet.

JoeyGC5

iTrader: (24)

Waiting for the dual bottle setup pics

16again

iTrader: (1)

One at a time man. Give me a chance to tinker some more with this before I blow the darn thing to smithereens.

Beer99C5

iTrader: (21)

Its a sickness..I can't stop either...BAP will be here Monday

LOL looking good 16!

16again

iTrader: (1)

Alright it is complete I think

Here are the final pictures.





I am far from a pro but think it came out very well and exactly as i had imagined.

JoeyGC5

iTrader: (24)

I should find pics of the fiberglass cover I made for my old 15lb bottle mount. Talk about a cluster to make something nice looking