FASTLS1WS6

iTrader: (6)

Hey all,
I am building a 6.0l cast iron block. It is the stock block, stock stroke with forged internals and a vick jr intake. I am running the APS TT system with about 10 to 12 psi. I am curious if the stock MAF sensor will be able to keep up with my set up. I ask becouse my brother has a 302 powerd rusttang and his maf will not support his vortec blower and the boost. Well atleast that is what a dyno shop told him.
Thanks for the help!

Thanks
Chris J

Websy21

iTrader: (34)

Yes but read up on it, a SD tune offers allot of advantages over the maf but it will be fine for your application.

ls1290

iTrader: (20)

Th MAF will max out and it will be up to the PE multiplier to get the A/F ratio correct. A good 2-bar SD tune will help things out a lot. A MAF based tune is perfectly fine for stock NA cars

Keith

FASTLS1WS6

iTrader: (6)

Thanks for the input guys.