PCM Diagnostics & Tuning HP Tuners | Holley | Diablo
Sponsored by:
Sponsored by:

crank position problems or something car runs bad please read

Thread Tools
 
Search this Thread
 
Old 06-05-2008, 10:09 PM
  #1  
12 Second Club
Thread Starter
iTrader: (22)
 
Travose21's Avatar
 
Join Date: Feb 2006
Posts: 684
Likes: 0
Received 0 Likes on 0 Posts

Default crank position problems or something car runs bad please read

I have replace the cps and the 02 sensor and put new plugs and now when drive the car it has a misfire when I am driving the car like the car needs gas. then it will have a backfire and cut off. then take awhile to start the it starts up and drive for a minute then do the same thing. misfire and sputter then cut off. I don't know what the hell is the problem I have tried everthing I haveno broken wires no bad sensors and the car is down again someone please post something to help me or call me at 5042284017 travis is the name
Old 06-06-2008, 01:49 AM
  #2  
Teching In
 
1QK-WS6's Avatar
 
Join Date: Sep 2006
Location: Houston,TX.
Posts: 17
Likes: 0
Received 0 Likes on 0 Posts
Default

No codes?
Old 06-06-2008, 09:05 AM
  #3  
12 Second Club
Thread Starter
iTrader: (22)
 
Travose21's Avatar
 
Join Date: Feb 2006
Posts: 684
Likes: 0
Received 0 Likes on 0 Posts

Default

no codes
Old 06-06-2008, 09:19 AM
  #4  
FormerVendor
iTrader: (45)
 
Frost's Avatar
 
Join Date: Jul 2005
Location: Richmond VA
Posts: 5,913
Likes: 0
Received 2 Likes on 2 Posts
Default

sent you another PM
Old 06-06-2008, 09:27 AM
  #5  
12 Second Club
Thread Starter
iTrader: (22)
 
Travose21's Avatar
 
Join Date: Feb 2006
Posts: 684
Likes: 0
Received 0 Likes on 0 Posts

Default

ok got it did you have any problems with the map or maf sensor because some people are telling me to try that also
Old 06-06-2008, 04:18 PM
  #6  
12 Second Club
Thread Starter
iTrader: (22)
 
Travose21's Avatar
 
Join Date: Feb 2006
Posts: 684
Likes: 0
Received 0 Likes on 0 Posts

Default

Anyone Else Have Any Answers
Old 06-08-2008, 02:26 PM
  #7  
9 Second Club
iTrader: (37)
 
cablebandit's Avatar
 
Join Date: Nov 2001
Location: Cleveland, OH
Posts: 7,903
Likes: 0
Received 1 Like on 1 Post

Default

grounds loose on back of head or wires broken IN insulation. My crank sensor wire was broken inside insulation once, idled in driveway for 30 minutes but cut off driving down my driveway.
Old 06-08-2008, 08:37 PM
  #8  
TECH Junkie
iTrader: (51)
 
30th t/a's Avatar
 
Join Date: Feb 2003
Location: Butler, PA
Posts: 3,094
Received 14 Likes on 13 Posts

Default

I had a similar problem. if I would jump on it, as soon as it would hit 4000 it would backfire super loud and shut down, 3 seconds later if you start right up and I would drive away. the problem was the crank sensor pigtail. I bought a new pigtail, soldered it in place and it was perfect again....all this after 2 months of trouble shooting.
Old 06-08-2008, 11:48 PM
  #9  
Staging Lane
iTrader: (11)
 
1966goat's Avatar
 
Join Date: May 2008
Posts: 69
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by cablebandit
grounds loose on back of head or wires broken IN insulation. My crank sensor wire was broken inside insulation once, idled in driveway for 30 minutes but cut off driving down my driveway.
I agree.




All times are GMT -5. The time now is 07:38 AM.