Cant remove axles!!
06-12-2008, 12:28 AM
#1
Staging Lane
Thread Starter
iTrader: (13)
Join Date: Jul 2006
Location: Plainfield IL
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Cant remove axles!! Can anyone tell me how to remove the axles on a Moser 12bolt, 33 spline axles. The rear has no abs or traction control, so I know that the sensors aren't in the way by the backing plate. Any input anyone?
Thanks,
-Pat
Thanks,
-Pat
06-12-2008, 01:50 AM
#3
How you remove them depends on the differential type/brand.
It either has C clips or not.
With c clips remove the crosspin bolt and pin, brakes, and push the axle in and turn it until you hear the c clip fall out, then pull the axle.
If you have a non c clip type, just remove the four brake backing plate bolts and pull, you don't even have to remove the cover/drain the fluid.
It either has C clips or not.
With c clips remove the crosspin bolt and pin, brakes, and push the axle in and turn it until you hear the c clip fall out, then pull the axle.
If you have a non c clip type, just remove the four brake backing plate bolts and pull, you don't even have to remove the cover/drain the fluid.
06-12-2008, 04:34 AM
#4
How you remove them depends on the differential type/brand.
It either has C clips or not.
With c clips remove the crosspin bolt and pin, brakes, and push the axle in and turn it until you hear the c clip fall out, then pull the axle.
If you have a non c clip type, just remove the four brake backing plate bolts and pull, you don't even have to remove the cover/drain the fluid.
It either has C clips or not.
With c clips remove the crosspin bolt and pin, brakes, and push the axle in and turn it until you hear the c clip fall out, then pull the axle.
If you have a non c clip type, just remove the four brake backing plate bolts and pull, you don't even have to remove the cover/drain the fluid.
