HPE Megadeath
06-18-2008, 06:23 AM
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Mar 2007
Location: Middle east , Kuwait
Posts: 1,591
Likes: 0
Received 0 Likes
on
0 Posts
HPE Megadeath hi , anyone tried this cam 244/242 .612/.610 112LSA ? how about this cam i heared from people they said it's stronger than G5X3 and MS3 , Dyno numbers or anything
thanks , Moammed.
thanks , Moammed.
Last edited by PONTIAC SLP; 06-18-2008 at 06:32 AM.
06-18-2008, 08:54 PM
#5
I like the name of it..LOL , did you try searching the dyno section?
here's one
https://ls1tech.com/forums/showthrea...hlight=244/242
here's one
https://ls1tech.com/forums/showthrea...hlight=244/242
I have the HPE Mega Death 244/242 .612/.610 112lsa
I may not recommend Chuck for Tuning anymore but this cam sure is nice
I am putting down 480rwhp and 460tq NA
The cam was designed to get the most out of stock casting heads, with a good tune it drives very well with a nice rumble at lights
I may not recommend Chuck for Tuning anymore but this cam sure is nice
I am putting down 480rwhp and 460tq NA
The cam was designed to get the most out of stock casting heads, with a good tune it drives very well with a nice rumble at lights
Trending Topics
06-20-2008, 11:09 AM
#11
I'll stick with my MS3.... The Megadeath cam requires lots of Gear in the rear to utilize its power.
I have a buddy with a C6 A4 3.15 gearing, with his old MTI X1 cam/ported LS6 heads he made 430rwhp and ran mid 11s. He switched to the Megadeath cam and Trickflow heads and FAST 90 and laid down 460rwhp, but his 1/4 mile times were in the high 12s. The car is a slug/mosh pit under 4k.
To get this car to come out the hole and move, he needs at least some 4.10s.
I have a buddy with a C6 A4 3.15 gearing, with his old MTI X1 cam/ported LS6 heads he made 430rwhp and ran mid 11s. He switched to the Megadeath cam and Trickflow heads and FAST 90 and laid down 460rwhp, but his 1/4 mile times were in the high 12s. The car is a slug/mosh pit under 4k.
To get this car to come out the hole and move, he needs at least some 4.10s.
