WTB: Wiring harness, UD pulley, oil cap, plug wires, nitrous kit
06-19-2008, 01:13 PM
#1
Teching In
Thread Starter
Join Date: Jan 2008
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
WTB: Wiring harness, UD pulley, oil cap, plug wires, nitrous kit Wish me luck and help me try to gather these items:
Project is an 89 gxl with a 2002 ls1/ t56
-2002 or whatever yr fits Oil dipstick and Tube
-99-02 wiring harness (modified prefered, but will also take painless, speartech etc) Bought
-SLP Underdrive Pulley for LS1 Bought
-Oil Cap Bought
-nice plug wires (motor is 2002 ls1) Bought
-Pro 5.0 or hurst or B&M ripper or any shifter and ****. I need everything from the rectangle piece up Bought
-Complete LS1 nitrous kit prefer wet shot
Thank you so much. Please let me know your prices shipped to 94566.
Project is an 89 gxl with a 2002 ls1/ t56
-2002 or whatever yr fits Oil dipstick and Tube
-99-02 wiring harness (modified prefered, but will also take painless, speartech etc) Bought
-SLP Underdrive Pulley for LS1 Bought
-Oil Cap Bought
-nice plug wires (motor is 2002 ls1) Bought
-Pro 5.0 or hurst or B&M ripper or any shifter and ****. I need everything from the rectangle piece up Bought
-Complete LS1 nitrous kit prefer wet shot
Thank you so much. Please let me know your prices shipped to 94566.
Last edited by import810; 06-20-2008 at 08:49 PM. Reason: purchased items
06-19-2008, 07:55 PM
#2
TECH Resident
iTrader: (21)
Join Date: Sep 2005
Location: New Jersey
Posts: 820
Likes: 0
Received 0 Likes
on
0 Posts
I have a used set of MSD 8.5mm wires. They have about 13,000 miles on them but are still good wires. When I replaced the old ones the stock ones were around 125ohms of resistance, the MSD's were 25ohms. When I pulled them off the worst one read 32 ohms. I can ship them to ya for 25 bucks, half the price of 'em brand new.
