black_phoenix

iTrader: (27)

Went to South Gate Dyno and did not regret it, great place

mods and #'s in my sig

Here's the vid

http://www.youtube.com/watch?v=YGEvGFIjr7g

jsteele90

iTrader: (13)

nice #s for your mods

pweterss

iTrader: (3)

stupid question,whats the ftra?

jsteele90

iTrader: (13)

fast toys ram air

brynnda

iTrader: (5)

niiice numbers!!!

black_phoenix

iTrader: (27)

Fast Toys Ram Air, useless mod IMO

brynnda

iTrader: (5)

pm sent

black_phoenix

iTrader: (27)

thanx guys

pweterss

iTrader: (3)

really good #'s for your mods!345 rwhp with the headers maybe?

black_phoenix

iTrader: (27)

that's what i will probably get... I really hope around 350-60 with the tune
I also want to finish Seafoaming my car and also replace a new fuel filter +new spark plugs with wires

Stroker396@APF

iTrader: (18)

Good Meeting you Today, Check out my numbers. Not sure I would recommend that cam, but I wanted to try something different than the one I have in BBB. Now if only I could hook!

Gotta find that Knock, so you can put down more.

black_phoenix

iTrader: (27)

so what numbers did you put down?
Btw i did have that knock before my TB... i actually suspect that A/C is causing it, because when i WOT without A/C on there is no knock... during the run i found that A/C was on but set on low...

what do you think?

hlaalu

iTrader: (3)

ive wondered what people think about it. don't they charge like 300 bucks for it too? anyways nice numbers, i bet you'll be pleasently surprised when you get your headers on!

cruiSSin LS1

iTrader: (2)

PM sent

Almostryan3

iTrader: (6)

the FTRA works, just not on a dyno. You would be better off making your own, much cheaper and it doesn't take all that much to do.

hlaalu

iTrader: (3)

^details on making one?

Almostryan3

iTrader: (6)

You can look it up on their website it doesn't take much. Just some square ducting that you can get at home depot. They have all the different angles and sizes. I have not done it myself but I did look into doing it and it wouldn't be very difficult. Pretty much everything you can get at home depot. Just look up a few different pictures of it or if you know someone close that has one just check it out and make a similar set up.

hlaalu

iTrader: (3)

so its basically a thin duct that runs inbetween the radiators right? with a scoop under the car?

cruiSSin LS1

iTrader: (2)

here i think this is what u guys r talking about...https://ls1tech.com/forums/generation-iii-external-engine/924996-my-ram-air-vs-stock-setup-how-much-hp-dif-track-results-tom.html

Almostryan3

iTrader: (6)

Yup. And goes into the bottom of the air lid.