Another pushrod thread..
#1
On The Tree
Thread Starter
Join Date: Jul 2007
Location: Houston, TX
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Another pushrod thread..
I'm a little unclear on what pushrods to get. I need hardened pushrods. .224/.228 on a 115 lsa is going in the bird. Can someone clarify how this works and what I might need.
Thanks again fellas.
Thanks again fellas.
#3
11 Second Club
iTrader: (9)
Join Date: Nov 2004
Location: Thornton, CO
Posts: 1,360
Likes: 0
Received 0 Likes
on
0 Posts
Agreed.
Does this motor have OEM lifters? Stock heads (untouched)?
More than likely, you are looking at 7.400" or 7.425" depending on the base circle of the new cam.
Although as mentioned, safest way (and the way to maximize the cam) is to measure. Maybe you need a 7.413" or something.
Does this motor have OEM lifters? Stock heads (untouched)?
More than likely, you are looking at 7.400" or 7.425" depending on the base circle of the new cam.
Although as mentioned, safest way (and the way to maximize the cam) is to measure. Maybe you need a 7.413" or something.