50_Dave

Do you have to use 2 solenoids or just use a "t" fitting to control the wastegates?

onfire

iTrader: (17)

I've done it both ways....both will work...single solenoid will have a higher duty cycle vs 2 solenoids.

Superman09

iTrader: (65)

i run just 1 solenoid with my APS kit and it seems to be doing fine!

70Stang

iTrader: (2)

Dave - both ways work great.

barnat

iTrader: (59)

I bought and use a single forge unit part #FMUNOS

lowbirdws6

iTrader: (62)

Turbonetics recommends using two so I went ahead and bought the second one. Can't tell you how it works though, I'm still looking for a replacement mitsubishi cartridge for my f-body passengers side APS kit. Mine went bad after only a months use, oil burnt on hot side and all over on cold side. The shaft is bent and the impellers are wasted. What a drag!!!

jason02Z

iTrader: (10)

i run 2 with my AMS controller one's a increase and the other is a decrease

MY99TAWS6

iTrader: (3)

I also caved and bought two but likely not going to be hooked up till spring.Cars is sleeping for the winter now.