Installing Moser 9"... found a great way to R&R the diff
#1
12 Second Club
Thread Starter
iTrader: (6)
Join Date: Jun 2004
Location: Ft. Irwin, California (But Virginia is home)
Posts: 1,501
Likes: 0
Received 7 Likes
on
1 Post
Installing Moser 9"... found a great way to R&R the diff
Borrowed a friends motorcycle jack. Wide enough on the pads that the pumpkin fits in the middle and the axle tubes are supported by the jack pads. The car itself is on jackstands. All I need is to lower the rear with the motorcycle jack and wheel it out from under the car. Install for the 9" will be the reverse.
Figured this might help someone out in the future
Will post a pic when I get to that point.....(working a lot lately, so probably Saturday)....
Figured this might help someone out in the future
Will post a pic when I get to that point.....(working a lot lately, so probably Saturday)....
#3
Borrowed a friends motorcycle jack. Wide enough on the pads that the pumpkin fits in the middle and the axle tubes are supported by the jack pads. The car itself is on jackstands. All I need is to lower the rear with the motorcycle jack and wheel it out from under the car. Install for the 9" will be the reverse.
Figured this might help someone out in the future
Will post a pic when I get to that point.....(working a lot lately, so probably Saturday)....
Figured this might help someone out in the future
Will post a pic when I get to that point.....(working a lot lately, so probably Saturday)....