blue99fbody

iTrader: (5)

Well i just shattered my ACPT carbon fiber driveshaft at the track yesterday and it didnt broom like it is supposed to it broke in half, so im wondering what i should by now, are steel ones that much heavier than aluminum and if so what aluminum on should i go with or have made.
thanks

ShevrolayZ28

iTrader: (4)

PST 3.5" aluminum or Strange 3" Chrome-moly would be in my decision.

Got any pics of your busted up ACPT?

staringback05

iTrader: (8)

stock wise the steel one is slightly heavier then the alumn....i would look into a chrome-moly and call it a day

BMR Tech2

iTrader: (5)

We offer several different drive shafts for your vehicle. If you have any questions please give us a call. Our tech/sales dept is open MON-FRI 8:30AM-6:00PM EST.
http://www.bmrfabrication.com/F-bodyDrivetrain.htm

3" x .083" DOM steel $299.95
3.5" x .083" DOM steel $329.95
3.5" Aluminum $389.95
3.25" Carbon Fiber $599.95
3.75" Carbon Fiber $849.95

blue99fbody

iTrader: (5)

ill get some pics when i get it out from under the car, its still on the trailer, i got to get another car off the lift first

EPP

iTrader: (22)

http://www.exoticperformanceplus.com....html?item=541

This PST 1000 rated hp driveshaft is the one we use and sell. You can check my car out in this video. http://www.exoticperformanceplus.com...html?item=1469 Bob

blue99fbody

iTrader: (5)

here are som pics turns out i bent my torque arm so it resulted in the driveshaft breaking

BMR Tech2

iTrader: (5)

Wow that was brutal, did it hurt anything other than your torque arm?