fuzzyjk

iTrader: (4)

I am looking for 500 Crank Hp or around 435 RWHP. Will I get there on a LS1 (M6) with the following: U/D pully, cold air intake, LT headers, 226/232 .609/.604 113LSA +2 cam, 5.3 stage 2.5 heads and fast intake. I want to keep a somewhat stock idle.

LS1C5Vette

iTrader: (11)

It will be close

fuzzyjk

iTrader: (4)

thanx, anyone else

SweeTbone

iTrader: (8)

Port that FAST 90 and if you have a good flowing exhaust it's possible. Not too sure about the bumpstick though. What cam is that? Custom?

BAD2000TA

iTrader: (6)

Look up Tony Mamo's build with their AFR 205 heads. Key are heads and properly ported FAST 90 or 92.

kkslds

iTrader: (59)

I put 435rwhp 390rwtq with the same heads and a 234/234 cam. Fast 90/90 not ported and all supporting mods

Max@Cartek

Heads and cam selection are key. Give us a call, we can get you squared up with a setup that will do what you are looking for easily.

Thanks,
Max
908.317.4496

WheelmanWS6

431 RWHP with F13 cam and Patriot Stage II LS6 heads.

That was on stock (LS6) intake as well.

full mod list on my car page.

Dragkid1917

iTrader: (2)

If your M6 youl definatly make it with that.