H/C Vig 3600 3.73 goes 12.4 at 108 HELP!
#1
TECH Enthusiast
Thread Starter
iTrader: (6)
Join Date: Dec 2005
Location: butler, pa
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
H/C Vig 3600 3.73 goes 12.4 at 108 HELP!
I have a full bolt on car. Headers, exhaust, ls6 intake, pulley. 224 cam and tsp prc 2.5 5.3 heads, along with the Vig 3600 and 3.73's. I also have lca's, relocation brackets, panhard bar, and bilstein shocks/struts.
Last year I had a slipping tranny, I went 12.2 at 112. I thought that was bad!
This year, I installed a built transmission, a nitrous plate kit, and a racetronix fuel pump. Went to the track last night and ran a 12.4 at 108. My 60' was 1.7. My car trapped 86 in the 1/8th. All NA.
Here is the slip from my 12.5 run:
60' 1.78 (worse than last year)
330' 5.14
1/8 et 7.97
1/8 mph 86.17
1000' et 10.44
1/4 et 12.51
1/4 mph 108.62
The car is hard to start at times. It will just turn over but not start. Like it is not getting fuel. I have a dyno tune, but I think someone may have done something to the computer and possibly did something. Not sure though.
Any help?
Also, for the nitrous I have a timing tuner. So there should full timing on NA runs.
Last year I had a slipping tranny, I went 12.2 at 112. I thought that was bad!
This year, I installed a built transmission, a nitrous plate kit, and a racetronix fuel pump. Went to the track last night and ran a 12.4 at 108. My 60' was 1.7. My car trapped 86 in the 1/8th. All NA.
Here is the slip from my 12.5 run:
60' 1.78 (worse than last year)
330' 5.14
1/8 et 7.97
1/8 mph 86.17
1000' et 10.44
1/4 et 12.51
1/4 mph 108.62
The car is hard to start at times. It will just turn over but not start. Like it is not getting fuel. I have a dyno tune, but I think someone may have done something to the computer and possibly did something. Not sure though.
Any help?
Also, for the nitrous I have a timing tuner. So there should full timing on NA runs.
Last edited by 99ccz28; 07-03-2008 at 08:05 AM.
Trending Topics
#11
LS1TECH & Trucks Sponsor
iTrader: (34)
Do you have a tune, and have you logged it for knock retard? Too much advance will make it hard to start and could cause your lack of power as ell
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice