BRPhotrods

iTrader: (3)

The Muscle Rod line of performance hedders for the 1967-1969 F-Body Camaro & Firebird & 1968-1974 Nova. The Muscle Rod line of hedders gives the enthusiast the most options for hedder choices so that you can get the right hedder for your build that’s designed to fit with the BRP LS conversion kit. These are offered at special pricing as a preorder that will be last until the end of July. These hedders are made by Hedman Hustlers racing division in the USA at the same facility that builds the NHRA top fuel hedders and are designed to make serious horsepower. The preorder prices are listed above the regular retail prices that will only last until the end of July. The Muscle Rod line is manufactured by Hustler but is exclusively retailed through BRP under the Muscle Rod product line. Were proud to say made in the USA.

All orders can be taken over the phone at 770-751-0687, website sales will not be available for hedders until after the pre-order is over.

We have most versions of these hedders in stock and ready to ship.

All Hedder’s can be used with the stock GM spark plug wires and have options for O2 bungs on all headers.

All hedders are ceramic coated inside and out including the reducer that has the o2 sensor welded in place.

Hedders can be ordered uncoated at a $75 discount

Tuned length hedders

























1 ¾ long tube hedder with a 3in collector
$599 Intro Price
$669 Retail Price

*These are made to fit any LS series engines including the LS7 I recommend running the 1 7/8 or 2in primary hedders on the L92 or LS7+ heads. These primaries are designed to clear the larger exhaust ports on the new GM heads.*

1 7/8 long tube hedder with a 3in collector
$639 Intro Price
$709 Retail Price

2in hedder for use with big cubic (427+) LS engines with a massive 3 ½ collector and on bolt on race collectors

$669 Intro Price
$749 Retail Price




Stepped hedders are a special order that will normally take 10-14 days from order due to the build to order specs. Any pre orders will not have a wait time and will ship with the first batch of hedders. All stepped hedders can be ordered with a 2-3 step. Such as with the 1 ¾ primary hedders will be stepped to 1 7/8 then to a 2in primary for a 3 ½ collector. Or for a smaller step to a 1 7/8 from 1 ¾ with a 3in collector

1 ¾ stepped long tube hedder with stepped primaries and a 3 or 3 1/2in collectors
$749 Intro Price
$799 Retail Price
Triple stepped hedders
$789 Intro Price
$849 Retail Price

1 7/8 long tube hedder with stepped primaries from 1 7/8 to a 2in primary and a 3 1/2in slip fit collectors
$799 Intro Price
$859 Retail Price


Mid Length hedders are available with the same thick 3/8 flanges and large 1 ¾ primaries with a ball collector. This is a great way to get extra clearance over a stock manifold and pick up some flow and great looks.
$449 Intro Price
$489 Retail Price












BRP is also going to offer complete exhaust systems for these headers that use mandrel bent tubing ether in stainless or aluminized with iconic sounding chambered mufflers. Other muffler options will also be available for those who want a toner sound.

Let me know if you have any questions about these headers or conversion kits all hedders are designed off a real car using a BRP LS conversion kit and the GM LH8 oil pan with the stock accessories. BRP will have these same hedder options for all cars that we offer LS conversions kits for.

On pre-order

70-81 F-Body
64-67 A-Body




Everyone of these hedders are built off the car with the factory steering box, so there is no clearance issues with the factory rear steering.

Its 3/8 flanges on all hedders including the mid lengths

Any hedder produced by Hedman Husler is considered a “hedder”.