ls1slow

iTrader: (1)

So i put LCA relocation brackets today and i got some wheel hop on the very first lanuch i did. I have UMI Double adjustabe control arms the 3 point subframe contectors. And ive NEVER had wheel hop before and i did right after i put thse on

2_wacko

iTrader: (2)

Try putting the lcas in a different hole on the relo brackets see if that helps.

CW00BlackTA

iTrader: (31)

But, you want your LCAs to be as close to level as you can get them. You might need an aftermarket torque arm to control the wheel hop. I did.

torlak_t

cw00, did it stop the wheel hop? and have u had any trouble after installing it? vibration, noise etc.?

SpdFrk1990

iTrader: (6)

Even if you dont have wheel hop an aftermarket torque arm is nice! Mine seems to make the shifting smoother and everything plus the car doesnt seem to torque as much on hard shifts now either.

CW00BlackTA

iTrader: (31)

Yes, it stopped the wheel hop completely. I have a Spohn body mount TA which I have learned to make work for me and live with without vibration. There are some tricks to it and it took some work. It does provide good traction. I would probably stay away from that one on a street car though. I'd get the longer TA that mounts off the transmission.