84z28Camaro
08-11-2008, 10:12 PM
So I'm getting around to building up my engine a bit, someone recommended to me this for the cam specs on a custom cam
Hydraulic flat tappet Cam
.234*/.242* duration @ 0.050
.509"/.528" lift @ .050
110* lobe seperation
107* intake centerline
was curious if anyone knew of anything that might work better or be very close that is off the shelf.
The engine is a 305 and will have vortec heads, summit racing stage 3 intake, shorty headers with probably american thunder exhaust system. I'm not great at knowing what all to give when asking for help so if you need more just let me know and I'll give the info if I have it.
Hydraulic flat tappet Cam
.234*/.242* duration @ 0.050
.509"/.528" lift @ .050
110* lobe seperation
107* intake centerline
was curious if anyone knew of anything that might work better or be very close that is off the shelf.
The engine is a 305 and will have vortec heads, summit racing stage 3 intake, shorty headers with probably american thunder exhaust system. I'm not great at knowing what all to give when asking for help so if you need more just let me know and I'll give the info if I have it.