big 3 for 220
08-13-2008, 02:10 PM
#1
Staging Lane
Thread Starter
Join Date: Jul 2005
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
big 3 for 220 Would these wires be big enough for a 220 amp. I want all opions on this to including any suggestions
http://www.innovativewiring.com/Chev...CamaroPage.htm
http://www.innovativewiring.com/Chev...CamaroPage.htm
08-13-2008, 10:39 PM
#4
I used their wiring to do mine for my 200 amp alternator, and I have been very pleased. Most would prefer to do it themselves (at least on the internet), but honestly, the price was worth it for the overall quality of his product...plus, I have no idea how to make wires and terminals when they are that big.
08-14-2008, 12:51 AM
#5
Looks good, if you don't mind spending extra, so you don't have to put it all together yourself.
But, if you do it yourself you can route the cables anyway you want, not how someone else wants it routed.
Thats why I did the "Big3" on my car myself!
But, if you do it yourself you can route the cables anyway you want, not how someone else wants it routed.
Thats why I did the "Big3" on my car myself!
08-14-2008, 08:02 PM
#6
Staging Lane
Thread Starter
Join Date: Jul 2005
Posts: 85
Likes: 0
Received 0 Likes
on
0 Posts
I just like the way they are premade and insulated. I just wanted to make sure the wire size was big enough for a big alternator like a 235 0r 220. by the way, is the powermaster 220amp alt with the big 3 enough for a 2000 watt system. My lights dim bad at night and my gauge bounces right now on a stock setup?
