Dynoed today at MTI Racing
#1
Launching!
Thread Starter
iTrader: (17)
Join Date: Dec 2007
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Dynoed today at MTI Racing
316.7/334tq on a dynojet, was told that this dyno reads low, car is an 01 m6 SS with 65k miles bone stock other than flowmaster catback, stock y and manifolds, no tune..whatcha think??? car also has ls6 block from factory(not that this is important right?)
#4
#6
LSX Mechanic
iTrader: (89)
Truth.
Those #'s are decent, especially since you have a muffler that flows the same or a tad worse than a stock one.
If you don't have any of the free mods or a ported TB swing by and I can pick you up about another 10-12 rwhp within about 45 minutes and very minimal spent.
Those #'s are decent, especially since you have a muffler that flows the same or a tad worse than a stock one.
If you don't have any of the free mods or a ported TB swing by and I can pick you up about another 10-12 rwhp within about 45 minutes and very minimal spent.
Trending Topics
#11
Launching!
Thread Starter
iTrader: (17)
Join Date: Dec 2007
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
NO!!! This is MTI Racing in Marietta,GA..these guys are top notch(TRUST ME), everyone that I met on the staff was extremely knowledgeable, curtious, and willing to answer any question that you could throw at them, the turnout was incredible and even with the pre-registration for the dyno they still managed to squeeze me in, hell Reese even gave me a written quote inbetween all the dynos and other stuff he had going on and this was my first time there. Get this, the guys called me yesterday just to thank me for coming out and was still willing to answer any questions that I had and discuss mods for my car. They even took me for a ride in the magnusson charged camaro, which I must say is very impressive..its a bone stock 01 with the only my mod being a magnaflow catback and strapped a magnusson ontop and puts down 465 or better to the wheels, I must say I was very impressed with the shop and the quality of their work and staff and I highly recommend you stopping by the shop if you are ever in the area. www.mtiracing.com