Andys94Z

iTrader: (2)

i'm trying to torque my intake manifold down right now, but i dont know the sequence.

would anybody happen to know that? or point me to a website that might have the information?

thanks

lt1formula275

if u r looking at the engine from the front of the car this is how it goes u have 6 on each side u do the ( front middle bolt on the drivers side first)(when i say front i mean the cloest to the front of the car) then u do ( the front middle bolt on the passenger side) then u do the (back middle bolt on the passenger side) then u do the (back middle bolt on the drivers side) then u do the (second bolt from the front on the drivers side) then u do the (first bolt on the manifold on the drivers side) then u do the (second bolt from the front on the passenger side) then u do ( first bolt on the manifold on the passenger side) then u do the (front back bolt on the passenger side) then u do the (last bolt on the passenger side) then u do the (front back bolt on the drivers side) then u do the (last bolt on the drivers side) if u have any questions just ask

Pro_built7

iTrader: (9)

http://shbox.com/ci/intake_sequence.jpg