NEW PB with my lsx v6 mustang
08-29-2008, 11:22 AM
#1
On The Tree
Thread Starter
iTrader: (10)
Join Date: Nov 2007
Location: orlando, fl
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
NEW PB with my lsx v6 mustang here is my first pass on motor....
R/T.......0.554
60'........1.980
330.......4.898
1/8.......7.420
MPH......97.38
1000.....9.599
1/4.......11.438
MPH......121.61
i got kicked out on my first nitrous pass........so its either time to get a cage or just keep it down.
this was my previous pass on motor before the new tranny/rear
R/T .....0.508
60'.......1.872
330......4.992
1/8.......7.602
MPH......94.62
1000.....9.820
1/4.......11.674
MPH.....122.32
all i know is the car was ridiculous on the spray. after my motor pass the fat guy at the light told me if i went that fast again.....not to bother pulling back in the lanes. i ran 1/8th mile and ended up going 11.40s once again
the car will be down again for a little while because i have to pull the tranny. i bought the trany fully built but since i bought it it had the wrong rear reluctor wheel, shaft, and the linkage was out of wack.
R/T.......0.554
60'........1.980
330.......4.898
1/8.......7.420
MPH......97.38
1000.....9.599
1/4.......11.438
MPH......121.61
i got kicked out on my first nitrous pass........so its either time to get a cage or just keep it down.
this was my previous pass on motor before the new tranny/rear
R/T .....0.508
60'.......1.872
330......4.992
1/8.......7.602
MPH......94.62
1000.....9.820
1/4.......11.674
MPH.....122.32
all i know is the car was ridiculous on the spray. after my motor pass the fat guy at the light told me if i went that fast again.....not to bother pulling back in the lanes. i ran 1/8th mile and ended up going 11.40s once again
the car will be down again for a little while because i have to pull the tranny. i bought the trany fully built but since i bought it it had the wrong rear reluctor wheel, shaft, and the linkage was out of wack.
08-31-2008, 12:52 PM
#4
On The Tree
Thread Starter
iTrader: (10)
Join Date: Nov 2007
Location: orlando, fl
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
the mods are champion ported heads, ls6 intake, and tr224 cam....through a 4l60e with a 3600 converter and 3.31 gears.
these passes were made on motor. my last nitrous pass on a 100shot was 10.81@128mph.
these passes were made on motor. my last nitrous pass on a 100shot was 10.81@128mph.
