MYLILSS

ok for those of you who have done this or know whats needed to do it...

i did this swap to my car, since it has the 98+ front end. right now i kind of have one size of hose on the throttle body and then a smaller on the MAF, and then clamped it down pretty hard to make it seal. it does the job but looks fairly tacky when i pop my hood. does anybody know where i could get an actual coupler to go from the size of the throttle body to the MAF that would look like it belongs ??

thanks for any help yall guys can give me

Revelation Z28

iTrader: (10)

get a WS6 bellow from SLP for the LT1, or just get a stock LS1 bellow and oval the TB side.

MYLILSS

ok so the ls1 bellow would be big enough to fit over the oval throttle body ? if so that sounds good to me

Revelation Z28

iTrader: (10)

yep, all you would ned to do is compress the hose clamp into an oval and wrestle it onto the TB flange.

MYLILSS

thanks for the info