Street Racing & Kill Stories Basic Technical Questions & Advice

My 03 Cobra vs LS6 Trans Am & Z06 !REMATCH! **VIDEO**

Thread Tools
 
Search this Thread
 
Old 09-05-2008, 06:37 PM
  #1  
Teching In
Thread Starter
 
AaronK's Avatar
 
Join Date: May 2008
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts

Default My 03 Cobra vs LS6 Trans Am & Z06 !REMATCH! **VIDEO**

So I got a rematch with the same guy that I lost to earlier in this video:

http://www.youtube.com/watch?v=hxhLbHoZ4Jc

^^that's the one he sprayed in

http://www.youtube.com/watch?v=W9NeEiq6ScU

^^this is the newest one where he doesn't spray

I'm 100% sure he sprayed me in those previous runs because I beat him pretty good this time. He has a TREX cam, fast intake, ported heads (don't know what kind) and nitrous. He claims to have a 75 shot. Watch the videos on the other thread and you tell me how much you think he was spraying.

I have an upper pulley, CAI, and full exhuast. I put down 441/431. It was a 3 way race with a Z06. Z06 has cam, longtubes, nitrous (he didn't spray when we raced) and some other bolt ons. I really don't know too much about it. My race in the video starts 2 minutes into it. We went from a 40 roll, 2nd-5th gear for me and in the video, it says I let off early just because I don't want to blow my **** up doing long *** highway pulls and I clearly won, there was no reason for me to keep going.

Last edited by AaronK; 09-06-2008 at 12:38 AM.
Old 09-05-2008, 06:46 PM
  #2  
Banned
 
jiggaboo's Avatar
 
Join Date: Apr 2008
Location: jersey
Posts: 23
Likes: 0
Received 0 Likes on 0 Posts
Default

link doesnt work
Old 09-05-2008, 06:50 PM
  #3  
TECH Fanatic
iTrader: (2)
 
Slvr00Bird's Avatar
 
Join Date: Jan 2007
Location: Ashland & Lexington, KY
Posts: 1,419
Likes: 0
Received 0 Likes on 0 Posts
Default

Fix link ASAP or BANNNN!!!!
Old 09-05-2008, 07:17 PM
  #4  
12 Second Club
iTrader: (10)
 
GR8GAME's Avatar
 
Join Date: May 2005
Location: Nor-Cal
Posts: 533
Likes: 0
Received 0 Likes on 0 Posts

Default

Old 09-05-2008, 08:10 PM
  #5  
Launching!
iTrader: (1)
 
LT1PwrdZ's Avatar
 
Join Date: Aug 2007
Location: Tulsa,OK
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Default

No Workie!!!!
Old 09-05-2008, 08:11 PM
  #6  
11 Second Club
 
blown03mustang's Avatar
 
Join Date: Dec 2007
Location: Charleston, SC
Posts: 868
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by jiggaboo
link doesnt work
same here

i wanna see it
Old 09-05-2008, 08:24 PM
  #7  
Moderator
iTrader: (15)
 
JayplaySS's Avatar
 
Join Date: Dec 2004
Location: Miami, OH
Posts: 4,616
Received 161 Likes on 99 Posts

Default

The new link now works

His race is 1:57 in and damn fine race might I add.
Old 09-05-2008, 08:36 PM
  #8  
Launching!
iTrader: (1)
 
LT1PwrdZ's Avatar
 
Join Date: Aug 2007
Location: Tulsa,OK
Posts: 236
Likes: 0
Received 0 Likes on 0 Posts
Default

NICE, Nice pulls, the one part the big rig was coming up fast for the ZO6. Be smart about it, Again NICE
Old 09-05-2008, 10:51 PM
  #9  
TECH Fanatic
iTrader: (39)
 
therobman's Avatar
 
Join Date: Oct 2006
Location: Nyc
Posts: 1,768
Likes: 0
Received 2 Likes on 2 Posts

Default

good kills but thats werid the ws6 is making prob almost the same amount of power as you he should have pulled usally it takes a cobra 30-40rwhp more to pull or be a dead *** race with a f-body. and for the z06 idk a stock z06 is very close to a pullied cobra and that one had a cam idk the z06 should have walked both
Old 09-06-2008, 12:15 AM
  #10  
Teching In
 
Steiner's Avatar
 
Join Date: Aug 2008
Location: Livermore, CA
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by AaronK
...it says I let off early just because I don't want to blow my **** up doing long *** highway pulls and I clearly won, there was no reason for me to keep going.
Nice run. The outcome was apparent when you let off. The race was over.
Old 09-06-2008, 12:33 AM
  #11  
Teching In
Thread Starter
 
AaronK's Avatar
 
Join Date: May 2008
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by therobman
good kills but thats werid the ws6 is making prob almost the same amount of power as you he should have pulled usally it takes a cobra 30-40rwhp more to pull or be a dead *** race with a f-body. and for the z06 idk a stock z06 is very close to a pullied cobra and that one had a cam idk the z06 should have walked both
I've ran that Z06 on motor and bottle. I beat him by about 1.5-2 cars off the bottle and he puts about 1.5-2 cars on me on the bottle. I'm not sure how much he is spraying though. I know he's got a decent size cam, LTs, CAI, and nitrous for sure.

Originally Posted by Steiner
Nice run. The outcome was apparent when you let off. The race was over.
Thank you! I don't know why they put that in the video, "Cobra off early"
Old 09-06-2008, 12:46 AM
  #12  
TECH Enthusiast
iTrader: (3)
 
The Manalishi's Avatar
 
Join Date: Jan 2008
Posts: 741
Likes: 0
Received 10 Likes on 5 Posts

Default

Good kill.
Old 09-06-2008, 01:50 AM
  #13  
TECH Fanatic
iTrader: (5)
 
bballr4567's Avatar
 
Join Date: Mar 2007
Location: Evansville, IN
Posts: 1,199
Likes: 0
Received 0 Likes on 0 Posts

Default

Sweet Cobra. The race was pretty obvious when you had a car-car 1/2 that soon into it. Did you take that last race too?
Old 09-06-2008, 02:20 AM
  #14  
TECH Apprentice
 
Skeet Skeet's Avatar
 
Join Date: Jan 2007
Location: Hudson florida
Posts: 359
Likes: 0
Received 0 Likes on 0 Posts

Default

If that z06 did have a cam and supporting mods then he should have beaten you i would think, but hey anything can happen on the street. Nice kills
Old 09-06-2008, 08:05 AM
  #15  
Teching In
Thread Starter
 
AaronK's Avatar
 
Join Date: May 2008
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by bballr4567
Sweet Cobra. The race was pretty obvious when you had a car-car 1/2 that soon into it. Did you take that last race too?
I beat the Z06 that last race, the MR2 was in front by about a fender, as I was catching up with him a car pulled in front of him. It would have been very close between the MR2. We didn't get another chance to run because my fuel light came on.

Originally Posted by Skeet Skeet
If that z06 did have a cam and supporting mods then he should have beaten you i would think, but hey anything can happen on the street. Nice kills
I've seen huge differences in cammed Z06s. I've beaten some by a couple cars and others have beat me. I would say it's driver, but there isn't too much skill involved in highway runs...
Old 09-06-2008, 08:24 AM
  #16  
TECH Addict
iTrader: (1)
 
Sarge_13's Avatar
 
Join Date: Oct 2007
Location: Schertz, Texas
Posts: 2,222
Likes: 0
Received 0 Likes on 0 Posts
Default

Smart move not running into your OD gears.
Nice runs Aaron.
Old 09-06-2008, 10:43 AM
  #17  
TECH Addict
iTrader: (7)
 
PewterScreaminMach's Avatar
 
Join Date: Sep 2006
Location: Austin, TX
Posts: 2,628
Likes: 0
Received 2 Likes on 2 Posts

Default

OMG at the Z06 almost clipping that truck.

Nice races!
Old 09-06-2008, 10:52 AM
  #18  
On The Tree
 
mrbigjeep's Avatar
 
Join Date: Jun 2008
Posts: 177
Likes: 0
Received 4 Likes on 4 Posts

Default

Originally Posted by therobman
and for the z06 idk a stock z06 is very close to a pullied cobra
not quite

http://www.youtube.com/watch?v=LwFYZSai1WA
Old 09-06-2008, 11:03 AM
  #19  
Teching In
Thread Starter
 
AaronK's Avatar
 
Join Date: May 2008
Posts: 32
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by Sarge_13
Smart move not running into your OD gears.
Nice runs Aaron.
Thanks... Yeah I've told him before that I was only gonna run to the top of 4th... In the video where he sprayed, I actually used 5th for a second because it was really close but I've seen motors hurt doing stuff like that.

How's the car going? Will it be done soon?
Old 09-06-2008, 12:43 PM
  #20  
Moderator
iTrader: (15)
 
JayplaySS's Avatar
 
Join Date: Dec 2004
Location: Miami, OH
Posts: 4,616
Received 161 Likes on 99 Posts

Default

Originally Posted by Sarge_13
Smart move not running into your OD gears.
Nice runs Aaron.

This man knows what he's talking about



All times are GMT -5. The time now is 06:07 AM.