Quick99TransAm

iTrader: (15)

Was wondering what you guys think. first time i have ported or polisheda T/B. I Have seen better from spartan but i didn't know what to use so i got some sanding drums and polish and my die grinder and started let me know what you guys think. Revision coming soon

LS1Wonder

iTrader: (1)

Definitely feel a major improvement in throttle response!

Red99TA

iTrader: (11)

Looks pretty good but hard to see how much material you removed (pic is a little blurry). Did you half shaft it, cut the screws flush and do the bump-stop?

scidav87

iTrader: (16)

looks good!

chrs1313

iTrader: (24)

you can take off alot more material...the front edge on mine comes to a point, defintiely do the half shaft mod too...otherwise not bad...also dont worry about polishing the intake it is a waste of time and costs hp...leave the sanding marks

Damian

iTrader: (89)

Very "pretty", but you've left LOTS of material in there.

Intercooler2

iTrader: (24)

Shame they don't shine at the track. You feel the response but doesn't equate when they hand you the piece of paper at the end with your time.