WS6 Canada

Looking to get a Vic JR intake(Nitrous bars plumbed in) and will also need a TB to go with it.
This is a Nitrous car 575 RWHP. Stock cubes (soon to be 454 LSX) I am going with the Vic Jr because of the safety reasons with Nitrous back fires and also the distribution to #7. I will also have an IntakeElbows.com elbow.
I realize that this is over kill for my LS1 now, but I am buying for the future build.

I am looking at the PTM 92, Rev Xtreme 90 or 95, Jantzer 92, New Era or anything else that might be better.

Please help.....

KrisXpc

iTrader: (13)

Make sure you give your car plenty of water with that N02. Wouldn't want a dehydrated motor!

Id say just go with a standard funnel from GNC. That should do the trick *giggle*

Jason 98 TA

iTrader: (4)

Don't rule out the PTM 95mm either. What opening does your elbow have?

WS6 Canada

I have not bought it yet. I was waiting to here from the forum and then you guys.....I was also looking into yourself for my LSX build also....

Full-Force

iTrader: (11)

Probably need to look into a super victor intake.

KrisXpc

iTrader: (13)

I just got the FAST 92/92 NW Tb For a nice price from Texas Speed. This is going on my LSX 454






I always enjoy doing business with Texas-Speed.

TLewis4095

iTrader: (10)

Here is a great deal!

https://ls1tech.com/forums/showthrea...017&highlight=

TVWilkes

I would recommend the PTM 92mm tb. If you are skilled with a die grinder then you could go with the PTM 95mm.

quikrnmost

Jantzer offers more options and the machined finish is the cheapest available at $329.

I ordered the polished one and will post it up when I get it. A steal at $399.