For You C5 Vette Guys..
09-15-2008, 09:22 PM
#1
For You C5 Vette Guys.. Hey Guys I have been playing with a C5 Zo6 lately and as a result I have came up with a few new goodies for you guys..
First our C5 Custom switch panel. This is made of annodized alluminum and laser etched.. This unit pops in and holds in place by the factory tabs.. Just like the ashtray.. Cost 59.99...
Need to retake this picture.. The switch panel was not poped all the way in place.. But you get the idea..
Second.. A fix for the bottle mounting blues.... Ok ON the C5 you are limited to area you can mount the nitrous bottle. Much less two of them. In this case the Z06 I was working on had alot of stereo equipment in the back and the center was one large speaker and up front was a amp rack.
The fix....
Billet aluminum cut plates that adhere to the floor of the car under the carpet. These plates have screw in studs for mounting the bottle. In the event you want to remove the system you simply remove the studs… Warning!! Once these plates glue down to the fiberglass floor they are permanent. Price will be posted soon. You can buy just one plate or both.
This picture is of the first set before we had to go back and make changes to fit flush with the floor.
Dave
First our C5 Custom switch panel. This is made of annodized alluminum and laser etched.. This unit pops in and holds in place by the factory tabs.. Just like the ashtray.. Cost 59.99...
Need to retake this picture.. The switch panel was not poped all the way in place.. But you get the idea..
Second.. A fix for the bottle mounting blues.... Ok ON the C5 you are limited to area you can mount the nitrous bottle. Much less two of them. In this case the Z06 I was working on had alot of stereo equipment in the back and the center was one large speaker and up front was a amp rack.
The fix....
Billet aluminum cut plates that adhere to the floor of the car under the carpet. These plates have screw in studs for mounting the bottle. In the event you want to remove the system you simply remove the studs… Warning!! Once these plates glue down to the fiberglass floor they are permanent. Price will be posted soon. You can buy just one plate or both.
This picture is of the first set before we had to go back and make changes to fit flush with the floor.
Dave
Last edited by Nitro Dave's Nitrous Outlet; 09-15-2008 at 10:07 PM.
09-16-2008, 10:34 AM
#4
For you C5 guys that did not already know we stock the Beer switch panels as well.
They are made from high impact plastic that has been laser etched and double side stickie tape in place..They come with the Corvette or Z06 logo lasered in.
You can find them on our website here.
http://www.nitrousoutlet.com/catalog...roduct_id=2838
http://www.nitrousoutlet.com/catalog...roduct_id=2840
Dave
They are made from high impact plastic that has been laser etched and double side stickie tape in place..They come with the Corvette or Z06 logo lasered in.
You can find them on our website here.
http://www.nitrousoutlet.com/catalog...roduct_id=2838
http://www.nitrousoutlet.com/catalog...roduct_id=2840
Dave
