which gears are best for highway racing/speed?
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
which gears are best for highway racing/speed?
i'm not really too concerned w/ 1/4 mile time.. i enjoy good top end more.. if i go w/ 4.10's will it make 4th gear weaker.. and what will each gear top out at.. i usually wont go over 120
also for daily driving.. i've heard 4.10's will sit at 2k rpm in 6th gear going 80 which isn't bad i think
also for daily driving.. i've heard 4.10's will sit at 2k rpm in 6th gear going 80 which isn't bad i think
#2
TECH Junkie
Join Date: Apr 2003
Location: Houston, TX
Posts: 3,340
Likes: 0
Received 0 Likes
on
0 Posts
Re: which gears are best for highway racing/speed?
Id say 4.10's are good but also look at 3.73's they work well with 6 speeds too.If your going to get gears and you have a 6 speed I say go with 4.10's they will wake your car up a lot.What mods do you plan on doing?I say go with 4.10's if your planning on getting gears.
#3
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
Re: which gears are best for highway racing/speed?
lol.. yeah i plan on gears.. heh.. other then that nothing real serious just headers, ls6 intake, lil bit of tuning and i think that'll be fast enough for me
#4
TECH Enthusiast
iTrader: (3)
Re: which gears are best for highway racing/speed?
If you are not concerned with the 1/4 mile stay away from 4.10's. 4.10's are for low end torque, and great for the 1/4 mile. If you're thinkin' about racing on the highway, say 100+mph, then just leave it stock. I've quickly run 150+mph on my stock rearend, just my opinion
#6
TECH Senior Member
Re: which gears are best for highway racing/speed?
What gears are best depends on from what speed to what speed you'll be racing from and to.
The gear ratios in your T56 tranny are as follows...
1st - 2.66
2nd - 1.78
3rd - 1.30
4th - 1.00
5th - .74
6th - .50
I'll assume a rev limiter of 6250 and a tire height of 25.66. From this we see that our top speeds by gear for a 4.10 ring and pinion are...
1st-43
2nd-65
3rd-89
4th-116
5th-157
6th-232
BTW, at 80 MPH in 6th gear, you'll be turning 2147 MPH.
If you want me to figure all of this for 3.73 gears, lemme know.
The gear ratios in your T56 tranny are as follows...
1st - 2.66
2nd - 1.78
3rd - 1.30
4th - 1.00
5th - .74
6th - .50
I'll assume a rev limiter of 6250 and a tire height of 25.66. From this we see that our top speeds by gear for a 4.10 ring and pinion are...
1st-43
2nd-65
3rd-89
4th-116
5th-157
6th-232
BTW, at 80 MPH in 6th gear, you'll be turning 2147 MPH.
If you want me to figure all of this for 3.73 gears, lemme know.
Trending Topics
#10
TECH Senior Member
Re: which gears are best for highway racing/speed?
I would like to know the ratios on 3.73 actually.
Of course, multiplying by 1.1 will get you really close.