SuperSlow02

iTrader: (16)

So I decided to put my LCA brackets on today, start taking the wheels off...and again, I have a cross threaded stud. Ive only used a socket on then and they never felt like they crossed threaded. Now I get to pull my axle and have my pefectly good bearing destroyed to get 1 fackin stud out AGAIN! Does moser make their studs out of Butter sometimes?

Jake@EPP

You can replace them with ARP for just a tad more then a replacement set, you can also get long ones for the race track and a shank lug rather then a conical.

SuperSlow02

iTrader: (16)

thats what Ive got 3in Moser studs,1/2in of course. The first set that got chewed up was just the 1 1/2in. Pulled off of them and replaced with the 3in. Now Im pulling the passanger side axle for 1 damn stud...

subhumanzz

iTrader: (46)

my guess is that it isn't a 4 channel right? if so i pounded mine out through the hole for the speed sensor.

SuperSlow02

iTrader: (16)

its a 4 channel, but the 3in studs wont fit through...nice huh?

SuperSlow02

iTrader: (16)

axle was removed in 29mins, that includes taking the wheel off with a rachet.... Im getting too good at this