Magna charger for 2001 f-body question
09-26-2008, 08:24 PM
#1
Teching In
Thread Starter
Join Date: Dec 2004
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
Magna charger for 2001 f-body question thinking about putting a magna charger roots blower on my 2001 ws6. Is there anything i should know, need extra, or problems i should know about and if anyone knows how much boost they put out and hp gains
thanks
thanks
09-27-2008, 03:15 AM
#2
Launching!
Join Date: Jan 2007
Location: Honolulu
Posts: 283
Likes: 0
Received 0 Likes
on
0 Posts
do a search, there's quite a few threads about this already. The kits are pretty all inclusive, and have all you need. They'll put out 10lbs of boost, but that's the max efficiently they can produce. With heads and cam they do 500+rwhp pretty easily.
09-27-2008, 12:59 PM
#4
That's funny Z06PSI, I haven't seen that one.
To the OP,
PM Rick at late model speed. I have talked to him several times and he seems to know what he's talking about. I think their kit is pretty much complete.
MTI came out with a kit but there wasn't that much info on it. I haven't seen any threads on it lately.
09-27-2008, 08:02 PM
#5
Teching In
Join Date: Aug 2008
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Maggie videos You can go to youtube to check out my 1998 Z28 with a Magnacharger I installed on her. I have three videos one showing pre maggie dyno runs, one video documenting the installalation of my maggie, and one video showing the dyno runs with maggie on the car.
Type in magnacharger camaro then look for maximum performance project anti venom. This is a kit from Late Model Speed. This car is so fun to drive. Instant power when you nail the throttle.
Type in magnacharger camaro then look for maximum performance project anti venom. This is a kit from Late Model Speed. This car is so fun to drive. Instant power when you nail the throttle.
09-27-2008, 08:49 PM
#7
Teching In
Join Date: Aug 2008
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
The car runs the same when driving the car for long peroids of time, and I haven't felt any power loss. The air intake sensor is located in the air box so I should not have a problem with heat soak. The car has alomost 445 hp at the wheels and 440 lbs of torque. I believe this is the most reliable form of power adder you can install on an LS series engine for reliable 100,000 mile durabilty.
Trending Topics
09-29-2008, 08:14 AM
#8
Feel free to PM or give us a call and Rick or myself would be happy to answer some questions. We've done a lot of them, and they will show you approx. 130 RWHP improvement over your current setup.
Ed
Ed
09-29-2008, 04:27 PM
#10
