Pads & Rotors for my DD?
#1
Pads & Rotors for my DD?
Today I decided to swap my stock wheels back on, while I had the wheels off I notice my brakes are just about gone. My rotors have some pretty deep grooves on the inboard side. The fronts are grooved too deep to cut out so I need new front rotors. Money is abit tight but what would be a good set of pads and rotors to go with. I'm not looking for the most agressive setup but I figured I'd upgrade alittle. This is my DD and I dont have alot of cash so if you guys could point in the right direction that would awsome.
#3
TECH Fanatic
iTrader: (1)
Join Date: Sep 2002
Location: Brisbane, QLD, AUS
Posts: 1,747
Likes: 0
Received 0 Likes
on
0 Posts
Hawk HPS and a quality blank rotor (exception would be the new Ate rotors with the elliptical wear indicators). Don't forget to flush that brake fluid if it's been over a year.
#4
LS1TECH Sponsor
iTrader: (41)
My brake page.... A variety of rotors on there, as well as Hawk pads
http://www.stranoparts.com/searchbym...D=17&ModelID=7
http://www.stranoparts.com/searchbym...D=17&ModelID=7
__________________
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!
www.stranoparts.com --814-849-3450
18 SCCA National Championships in house, many more for our customers prove we know our stuff.Talk is cheap, results matter.
Check out our KONI prices, our Master Cylinder Brace, and new Xtracker Hub/wheel bearing upgrade kits!