Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

sensor connection problem with my 12-bolt???

Thread Tools
 
Search this Thread
 
Old 09-11-2003, 09:37 PM
  #1  
TECH Senior Member
Thread Starter
 
akaceril's Avatar
 
Join Date: Sep 2002
Location: Tacoma, WA
Posts: 7,064
Likes: 0
Received 0 Likes on 0 Posts
Default sensor connection problem with my 12-bolt???

I just finished breaking it in gonna change the fluid tomorrow. on the highway after spending about 10 minutes or more at 65+ MPH the ABS inop and TCS off lights come on. had this happen a few times but not all the time. I checked the connections they are good. could it be a bad sensor? I am sorta at a loss as to figure this one out. If it makes a difference I also installed a torque are, SFC, LCA's, relocation bractets and a panhard rod all BMR and all Adjustable. could it be my allignment is of a little and causing it. will be getting an allignment this weekend.




All times are GMT -5. The time now is 07:53 PM.