finished with my build :D
10-14-2008, 07:01 PM
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2004
Location: Downey, California
Posts: 484
Likes: 0
Received 0 Likes
on
0 Posts
finished with my build :D well I finnaly finished my build I did do extra work but it needed it
new scat crank, crane cam 227, forged pistons, 180 cc AI heads,
new 02 sensor,new A/C , new brake lines, new fuel pump oh and I finnaly fig why my car took a couple of cranks before it started because my fuel pump fuel line had a small hole (in the tank) so it wouldn't build pressure.
I'm still tuning it but that cam is sweet, it pulls good and when it hits second it really pulls good
I did do a couple of runs so I can tune and seat my rings but from about 2000rpm you hit the gas and it pulls consant all the way up to 6000 rpm, it still felt like it had more power but for now 6000 rpm is good with me..
I only have 220 miles on it but hopefully it will get better once it breaks in.
new scat crank, crane cam 227, forged pistons, 180 cc AI heads,
new 02 sensor,new A/C , new brake lines, new fuel pump oh and I finnaly fig why my car took a couple of cranks before it started because my fuel pump fuel line had a small hole (in the tank) so it wouldn't build pressure.
I'm still tuning it but that cam is sweet, it pulls good and when it hits second it really pulls good
I did do a couple of runs so I can tune and seat my rings but from about 2000rpm you hit the gas and it pulls consant all the way up to 6000 rpm, it still felt like it had more power but for now 6000 rpm is good with me..
I only have 220 miles on it but hopefully it will get better once it breaks in.
Last edited by slagger; 10-14-2008 at 07:08 PM.
