LT1-LT4 Modifications 1993-97 Gen II Small Block V8

Headed back to the Track! LT1 6spd(part 2)

Thread Tools
 
Search this Thread
 
Old 11-22-2008, 09:02 PM
  #1  
TECH Fanatic
Thread Starter
iTrader: (7)
 
Green3spd's Avatar
 
Join Date: Oct 2007
Location: Little Rock, Ar
Posts: 1,177
Likes: 0
Received 1 Like on 1 Post
Default Headed back to the Track! LT1 6spd(part 2)

OK! Finally went to the track today after the Hooker LTs and no cats!

Before the Headers...

.5847---RT
2.08----60ft
5.74----330ft
8.78----1/8th
81.76---1/8 mph
11.19---1000ft
94.20---1000ft mph

After LTs and cats cut...

.6879---RT
1.96----60ft
5.54----330ft
8.52----1/8th
83.91---1/8 mph
10.86---1000ft
96.69---1000ft mph

I was happy with the results!

Do you think its 12s yet?

Now with that out of the way! I have to tell you guys about a grudge match I had with an older guy at work...

He drives an 07' Mustang CS/GT...
K&N, BBK TB, Xpipe, Flowmasters, 3.73, Handheld(harder shifts, etc), and DRs...And alot of **** talkin!(cant wait till monday morning!)

(me on left/mustang on right)

.5532---RT-----------.4890
2.03----60ft----------2.14
5.63----330ft---------5.93
8.59----1/8th---------9.06
84.55---1/8 mph------80.06
10.92---1000ft--------11.53
97.51---1000ft mph---91.80

Heres the video...



by end of track I had him in my rear view...
Old 11-22-2008, 09:06 PM
  #2  
11 Second Club
iTrader: (17)
 
AChotrod's Avatar
 
Join Date: Jul 2008
Location: Chicago area
Posts: 9,896
Likes: 0
Received 1 Like on 1 Post
Default

NICE KILL! I think it could go 12.99
Old 11-22-2008, 09:20 PM
  #3  
TECH Fanatic
Thread Starter
iTrader: (7)
 
Green3spd's Avatar
 
Join Date: Oct 2007
Location: Little Rock, Ar
Posts: 1,177
Likes: 0
Received 1 Like on 1 Post
Default

I think its def 12.90s
Old 11-22-2008, 11:48 PM
  #4  
TECH Fanatic
iTrader: (4)
 
LM97Z's Avatar
 
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes on 0 Posts
Default

Hey Green, where is that track at, is it Bentenville track? I'm here in SW missouri about 30 miles from Harrison Ak. I heard there is going to be a big bash at one of the Ak tracks this next weekend, congrats on the 10.8s, your running really good, i'm shure your in the 12s @ 106+, what is the altitude there? Did you check the DA when you raced?
Old 11-23-2008, 12:15 AM
  #5  
11 Second Club
iTrader: (35)
 
StealthFormula's Avatar
 
Join Date: Apr 2005
Location: Skippack, PA
Posts: 4,798
Received 54 Likes on 50 Posts

Default

Nice job beating that Stang...Car sounds good too!

With that 1/8th your at about a 13.3 which I would say is good for what you have done.
Old 11-23-2008, 12:31 AM
  #6  
TECH Fanatic
Thread Starter
iTrader: (7)
 
Green3spd's Avatar
 
Join Date: Oct 2007
Location: Little Rock, Ar
Posts: 1,177
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by LM97Z
Hey Green, where is that track at, is it Bentenville track? I'm here in SW missouri about 30 miles from Harrison Ak. I heard there is going to be a big bash at one of the Ak tracks this next weekend, congrats on the 10.8s, your running really good, i'm shure your in the 12s @ 106+, what is the altitude there? Did you check the DA when you raced?
No, we went to centerville... and I have no idea on the DA... I hope its a 12.. Ill prolly never know, by the time the track opens back up ill hopefully have my custom grind installed.. lol.
Old 11-23-2008, 12:35 AM
  #7  
11 Second Club
iTrader: (35)
 
StealthFormula's Avatar
 
Join Date: Apr 2005
Location: Skippack, PA
Posts: 4,798
Received 54 Likes on 50 Posts

Default

I don't know your DA and theres always many variables but I'm pretty sure to hit 12's the average 1/8" is in the 8.2-3 range from what I have gathered. Seems like your pretty damn close tho.
Old 11-23-2008, 01:00 AM
  #8  
TECH Fanatic
Thread Starter
iTrader: (7)
 
Green3spd's Avatar
 
Join Date: Oct 2007
Location: Little Rock, Ar
Posts: 1,177
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by StealthFormula
I don't know your DA and theres always many variables but I'm pretty sure to hit 12's the average 1/8" is in the 8.2-3 range from what I have gathered. Seems like your pretty damn close tho.
Well the reason I think 12s is bc MPE331lx did this bout a couple week ago...

R/T......002 ......056 .........243........041.........219
60ft.....2.57......2.26.........2.02 ......2.07........2.11
330.....6.19......5.87 .........5.57......5.60........5.64
1/8......9.12......8.83.........8.50 ......8.51........8.56
MPH....84.51.....83.66......84.74......85.09...... 84.8
1000...11.64....11.37.......11.01......11.01...... 11.07
1/4......13.76....13.51......13.12......13.12......1 3.19
MPH....106.93...106.01...107.1......107.19.....106 .87

But I know there are many variables like you said...
Old 11-23-2008, 01:25 AM
  #9  
11 Second Club
iTrader: (88)
 
the_merv's Avatar
 
Join Date: Mar 2006
Location: The Beach...
Posts: 19,260
Received 59 Likes on 52 Posts

Default

Yea, that should be close to the 12's..
Old 11-23-2008, 01:39 AM
  #10  
11 Second Club
iTrader: (35)
 
StealthFormula's Avatar
 
Join Date: Apr 2005
Location: Skippack, PA
Posts: 4,798
Received 54 Likes on 50 Posts

Default

Originally Posted by Green3spd
Well the reason I think 12s is bc MPE331lx did this bout a couple week ago...

R/T......002 ......056 .........243........041.........219
60ft.....2.57......2.26.........2.02 ......2.07........2.11
330.....6.19......5.87 .........5.57......5.60........5.64
1/8......9.12......8.83.........8.50 ......8.51........8.56
MPH....84.51.....83.66......84.74......85.09...... 84.8
1000...11.64....11.37.......11.01......11.01...... 11.07
1/4......13.76....13.51......13.12......13.12......1 3.19
MPH....106.93...106.01...107.1......107.19.....106 .87

But I know there are many variables like you said...

I see where your coming from...good **** man I definetly think your car is running strong for just having full exhaust. Its too bad that track isn't a 1/4 mile so you could have some nice slips to go along with it.
Old 11-23-2008, 03:11 AM
  #11  
TECH Fanatic
iTrader: (4)
 
LM97Z's Avatar
 
Join Date: Feb 2008
Location: S.W. Missouri
Posts: 1,291
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by Green3spd
No, we went to centerville... and I have no idea on the DA... I hope its a 12.. Ill prolly never know, by the time the track opens back up ill hopefully have my custom grind installed.. lol.
Thats what i meant to say (centerville), thats a cool nastalgic looking track. I'm sure your right there at a 13.0, especially if you get that 60ft. down around a 1.90, you'll be in the 8.4s 1/8, still thats GREAT for any fully dressed car with just bolt-ons. enough to do much damage on the street, i always have some joker in there truck/suburban trying to jack with me , i just laugh, they may jump me from the start with my stick car, but then its allllll over from there .
Old 11-23-2008, 08:05 AM
  #12  
12 Second Club
 
Smokinlt1's Avatar
 
Join Date: Jun 2005
Location: Warner Robins Ga
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Default

Nice kill!! Love it when our cars beat up on newer cars, esp stangs. I wanna say your very close 12s my 1/8 time on my 12.99 run was 8.4 I believe. If I can find it I'll post it.
Old 11-23-2008, 08:12 AM
  #13  
12 Second Club
 
Smokinlt1's Avatar
 
Join Date: Jun 2005
Location: Warner Robins Ga
Posts: 509
Likes: 0
Received 0 Likes on 0 Posts
Default

Actually this my 1/8 8.233@81.81. You def got the mph for lower 1/8 times, get 60 down.
Old 11-23-2008, 08:26 AM
  #14  
TECH Junkie
iTrader: (22)
 
camar0corey's Avatar
 
Join Date: May 2006
Location: Spring Hill, FL
Posts: 3,975
Likes: 0
Received 2 Likes on 2 Posts

Default

Nice killing the Mustang. I know a guy that owns a shop, one of his customers had one. He did CAI, full exhaust, and a Zex kit on it. He said the thing was still dog slow and rode like crap. I'll probably never even test drive one.
Old 11-23-2008, 09:15 AM
  #15  
11 Second Club
iTrader: (88)
 
the_merv's Avatar
 
Join Date: Mar 2006
Location: The Beach...
Posts: 19,260
Received 59 Likes on 52 Posts

Default

I test drove the new GT's when they came out in 2005.. me and a friend of mine went at the time cause she wanted to look at one. It was a 5spd and she didn't know how to drive it, so I took the wheel, played with it for a little bit, and wasn't impressed..kinda disappointed really.

Then we left when the guy went inside to get the paperwork for it..he was trying to sell it and had no clue with anything about the Car. That's kinda disappointing really..
Old 11-23-2008, 11:48 AM
  #16  
Banned
iTrader: (36)
 
daniel6718's Avatar
 
Join Date: Jun 2004
Location: garland tx
Posts: 3,760
Likes: 0
Received 1 Like on 1 Post
Default

normally a 8.3 or so is a 12.9
Old 11-23-2008, 01:04 PM
  #17  
TECH Fanatic
Thread Starter
iTrader: (7)
 
Green3spd's Avatar
 
Join Date: Oct 2007
Location: Little Rock, Ar
Posts: 1,177
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by camar0corey
Nice killing the Mustang. I know a guy that owns a shop, one of his customers had one. He did CAI, full exhaust, and a Zex kit on it. He said the thing was still dog slow and rode like crap. I'll probably never even test drive one.
Speaking of ZEX... he has a kit on his Mustang and with a 125 shot he only went 10.19... (1000ft) from his best 11.30 all motor... that car is extremely disappointing!
After I beat him he said, "you wanna race me on the bottle now?!"
I said......................"What do you think...?"

He's a sore loser..

I CANT WAIT TILL MONDAY MORNING!
Old 11-23-2008, 01:44 PM
  #18  
TECH Junkie
iTrader: (34)
 
SoxXpupPeT's Avatar
 
Join Date: May 2008
Location: Yonkers, NY
Posts: 3,429
Received 1 Like on 1 Post

Default

awesome run and a good launch! gotta shut some people up with actions, not words :p
Old 11-23-2008, 07:07 PM
  #19  
TECH Fanatic
Thread Starter
iTrader: (7)
 
Green3spd's Avatar
 
Join Date: Oct 2007
Location: Little Rock, Ar
Posts: 1,177
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by SoxXpupPeT
awesome run and a good launch! gotta shut some people up with actions, not words :p
Very true..



Quick Reply: Headed back to the Track! LT1 6spd(part 2)



All times are GMT -5. The time now is 07:37 PM.