Lets see your "Race Car" Interiors
01-24-2009, 09:23 PM
#1
01-24-2009, 10:47 PM
#4
12 Second Club
iTrader: (2)
Join Date: Dec 2008
Location: Peoria, AZ
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
okay so i hated the install that was on the car when i got it so i moved EVERYTHING around, hid the switches with an HSW ashtray plate, hid the selinoids under the air filter, ran the purge over the left headlight, and added an HSW interface.
old install
http://www.nitrousforum.com/forums/s...ead.php?t=1735
new install
old install
http://www.nitrousforum.com/forums/s...ead.php?t=1735
new install
now with the NANO
so in keeping with the stealth install here's how i managed to mount my microedge, LM-2 and the NANO system. I love the TPS feature on the microedge it allowed me to delete my WOT switch so now not a single part of my nitrous system is visable
its a bit of a tight fit with the 3000psi bottle but it wasnt too bad
i still have to get some more black sleeving for the wires but this placement works great, i can still reach all the buttons on the LM-2 and pop out the SD card, and i can easily work the buttons on the Microedge plus i leave the glove box open so as im prestaged i can look over to ensure that it is in Armed mode not standby or setup. Let mekow what ya'll think, i'm always open to suggestions
its a bit of a tight fit with the 3000psi bottle but it wasnt too bad
i still have to get some more black sleeving for the wires but this placement works great, i can still reach all the buttons on the LM-2 and pop out the SD card, and i can easily work the buttons on the Microedge plus i leave the glove box open so as im prestaged i can look over to ensure that it is in Armed mode not standby or setup. Let mekow what ya'll think, i'm always open to suggestions
