97pontta

iTrader: (10)

First off, MODS if this thread is a problem delete it, I don't want to cause any problems.

I'm looking for 2-3 LT1 guys running the stock valve covers. Recently I made a billet oil fill tube for my car and thought it turned out pretty well so I ran some extras and might try to sell them. What I need is 2-3 guys to test fit them for me. They fit perfect on my car but I want to make sure there are no problems when I go to make more. What I need is feedback on how they fit, how you like them and some pictures installed. After that the oil fill tube is yours, if you want it. I'll even pay to ship them to you.

Here is a link to what they look like, installed they are 3.75 above the valve cover. That is shorter than the black OEM plastic one.
http://www.cardomain.com/ride/363512/5#v768

They have o-rings at the valve cover and oil filler cap location.

If anyone is interested let me know.

ThoR294

iTrader: (6)

oh wow that is cool. I can test fit them if ya want

Formula350

iTrader: (3)

While I can't STAND those tall filler, those are very very nice. Good job on them!

If you have factory valve covers (the stamped steels) then.... and I"m sorry to say this for anyone involved lol.... you can just goto any small block chev from 85-99 305 and 350s. Same covers the whole time, best place to find them is on trucks. I really feel that GM should've given F/Y body cars some new style valve covers -_- [/hijack]

95z28camaro

iTrader: (15)

Well i dont have stock valve covers but i still use the stock oil fill tube. Id be glad to try it out for ya! If not how much would you sell one for?

You can see it in the pic below, I know that pic looks bad but ive cleaned it up since then...

riceburnerZ28

iTrader: (20)

^^^^Yes those valve covers do suck ! To the Op I will try one out !

97pontta

iTrader: (10)

Thanks for the quick responce guys. The first 3 to PM me I can hook up. Just remember I need feedback on how they fit and pictures

Puck

iTrader: (17)

I have Cantons if you are interested in testing one with aftermarket VC's.

Black94Z28

iTrader: (12)

Feel free to send me one to test out, ill give you a shot out in my build thread too

SoxXpupPeT

iTrader: (34)

those are gorgeous! ill buy one of there not to pricey if you plan on marketing them

ss.slp.ls1

iTrader: (36)

I'll test fit one.

2XR95Z28

iTrader: (4)

Would be willing to test on my 95 also, i got the covers off right now too. PM me if you need more test cars

CamaroRacing12

iTrader: (5)

i'll take one if ur giving them out and test it for ya

rusty2198

PM sent.

Man you are one fabricating wizard make a price list of those suspension parts you made I'm digging that torque arm.

whytryz28

iTrader: (28)

Your stuff on that page amazes me. Good work on the custom fab. parts

97pontta

iTrader: (10)

Thanks for all the offers and comments guys, but all the oil fills were gone about 30 minutes after I posted it! Hopefully I have good feedback and no fitment issues from the guys that are trying them out.

dlk1950

Very nice...Great work...I'll be waiting for you to put them on sale.

97pontta

iTrader: (10)

Thanks,

I've spent a lot of time building a lot of that stuff. For the hours involved some items would have been cheaper to just purchase, but that wouldn't be as fun and I wouldn't learn as much.

When I built the subframe connectors all I had for tools was a 40 year old arc welder, oxy torch and a drill press. Cut the tubes, heated them up and bent them slightly, let cool, reheat and bend slightly about 100 more times, test fit on the car and keep bending. The good thing was it kept me busy for a weekend

96 Z-Ragtop

iTrader: (3)

If all the trials work out how much are they gonna be?

97pontta

iTrader: (10)

Right now I'm thinking around $44.00. If I can get more interest the price could come down. I will be able to tell more in the next week or two.

ThoR294

iTrader: (6)

your fab work is crazy man. I love the throttle bodies