How to change belt and fuel filter ?
04-26-2009, 08:07 PM
#2
Fuel filter is easy. You'll want to relieve the fuel pressure on the lines (take off the gas cap, relieve pressue via the Schrader valve on the fuel rail (back of the intake manifold, looks like a tire valve). Filter is located under the car about midway. One half connects with a clip, the other half threads on. Squeeze the clips and slide the line off, then unthread the other half. Replace with the new one, and you're finished.
04-26-2009, 09:44 PM
#3
TECH Veteran
Shouldn't take you long.
05-02-2009, 09:12 PM
#7
just got time to change fuel filter today ( ac delco ), I took the old filter off ( napa pro select )and try to blow it both way and it hard to blow, is that bad right ? new filter I blow both way easy. anyway before change filter my car have hard time start , but after filter it start up every time. 
, car run more smooth. my next thing on the list will be plug and wire. thanks every one.
, car run more smooth. my next thing on the list will be plug and wire. thanks every one. Trending Topics
05-03-2009, 06:35 AM
#8
just got time to change fuel filter today ( ac delco ), I took the old filter off ( napa pro select )and try to blow it both way and it hard to blow, is that bad right ? new filter I blow both way easy. anyway before change filter my car have hard time start , but after filter it start up every time. , car run more smooth. my next thing on the list will be plug and wire. thanks every one.
, car run more smooth. my next thing on the list will be plug and wire. thanks every one.
, I have few check engine code, after change out fuel filter and reset the battery, the code havent back yet, I forgot the code but it say something about bank 1 and bank 2 running rich. Imma post the code if it ever come back. 