LT1-LT4 Modifications 1993-97 Gen II Small Block V8

RPMs increase while on the brake

Thread Tools
 
Search this Thread
 
Old 08-10-2009, 07:23 PM
  #1  
Launching!
Thread Starter
 
xxRONNIExx's Avatar
 
Join Date: Jun 2009
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts
Default RPMs increase while on the brake

Havent drove my car in about 2 weeks. Jumped in it today and it really started acting funny. While at a stop light my RPMs started to increase while my foot was on the brake. Oil levels were jumping up and down as well.
Acceleration wasnt as good as it usually is.
Once I got home I could also see smoke (exhaust) coming into the car. Check under the car and smoke was coming from the pipe exhaust near the passenger door.Pipes looked wet as if it had oil or maybe tranny fluid on it. Not sure where to start first.
Old 08-10-2009, 07:31 PM
  #2  
TECH Regular
iTrader: (8)
 
My95Z's Avatar
 
Join Date: Mar 2009
Location: Maryland
Posts: 475
Likes: 0
Received 0 Likes on 0 Posts
Default

Find out what it was on the exhaust (oil/tranny fluid/coolant) then it will give you a clue as to what is going on and where to look.
Old 08-10-2009, 07:41 PM
  #3  
TECH Senior Member
iTrader: (36)
 
ss.slp.ls1's Avatar
 
Join Date: Jan 2008
Location: Orange County, CA
Posts: 8,188
Received 26 Likes on 24 Posts

Default

Originally Posted by My95Z
Find out what it was on the exhaust (oil/tranny fluid/coolant) then it will give you a clue as to what is going on and where to look.
Agreed. Maybe your rear intake seal blew and you now have a vacuum leak and a oil leak. But that's just speculation until you find the real problem.
Old 08-10-2009, 08:00 PM
  #4  
Launching!
Thread Starter
 
xxRONNIExx's Avatar
 
Join Date: Jun 2009
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts
Default

Okay thanks guys....I'll do that first.
Old 08-10-2009, 08:51 PM
  #5  
Launching!
Thread Starter
 
xxRONNIExx's Avatar
 
Join Date: Jun 2009
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts
Default

Okay I checked under my car and I do have an oil leak. So Im thinking when Im driving the dripping oil may be flying back to the exhaust ( but not positive). It is oil.
Now why would my RPMs start increasing when Im at a stop light with my foot on the break as well as my oil temp gauge?
Old 08-10-2009, 09:35 PM
  #6  
TECH Fanatic
iTrader: (1)
 
litch2004's Avatar
 
Join Date: May 2007
Location: Austin
Posts: 1,782
Likes: 0
Received 1 Like on 1 Post
Default

if the rear of the intake mani seal is busted it can do both. it did with mine at least
Old 08-11-2009, 01:00 AM
  #7  
TECH Fanatic
iTrader: (4)
 
2XR95Z28's Avatar
 
Join Date: Jul 2007
Location: Davenport, IA
Posts: 1,351
Likes: 0
Received 0 Likes on 0 Posts

Default

Yep sounds like a vacuum leak causin the RPM to increase when the brakes are pulling vacuum and oil gauge to bounce around. I'm puttin money on an intake leak...
Old 08-11-2009, 01:32 AM
  #8  
TECH Resident
iTrader: (1)
 
93TAJ.C.'s Avatar
 
Join Date: Oct 2008
Posts: 836
Likes: 0
Received 0 Likes on 0 Posts

Default

definately intake leak, no biggie.
Old 08-11-2009, 12:56 PM
  #9  
Launching!
Thread Starter
 
xxRONNIExx's Avatar
 
Join Date: Jun 2009
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by 93TAJ.C.
definately intake leak, no biggie.
So whats the best route for me to fix the intake leak? Never did it before.
Old 08-11-2009, 12:59 PM
  #10  
TECH Fanatic
iTrader: (1)
 
litch2004's Avatar
 
Join Date: May 2007
Location: Austin
Posts: 1,782
Likes: 0
Received 1 Like on 1 Post
Default

remove the intake manifold and replace it with a new one. Actually not bad of a job.
Old 08-11-2009, 12:59 PM
  #11  
TECH Senior Member
iTrader: (36)
 
ss.slp.ls1's Avatar
 
Join Date: Jan 2008
Location: Orange County, CA
Posts: 8,188
Received 26 Likes on 24 Posts

Default

Originally Posted by xxRONNIExx
So whats the best route for me to fix the intake leak? Never did it before.
You have to remove the intake manifold and reinstall it with new intake manifold gaskets and a nice thick bead of RTV on the front and rear block rails.
Old 08-11-2009, 01:10 PM
  #12  
Launching!
Thread Starter
 
xxRONNIExx's Avatar
 
Join Date: Jun 2009
Posts: 247
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ss.slp.ls1
You have to remove the intake manifold and reinstall it with new intake manifold gaskets and a nice thick bead of RTV on the front and rear block rails.
Okay thanks guy..man I just cant seem to stay from under this hood (always something)...
Old 08-11-2009, 01:36 PM
  #13  
11 Second Club
iTrader: (4)
 
lifeisgood's Avatar
 
Join Date: Oct 2006
Location: ky
Posts: 1,029
Likes: 0
Received 0 Likes on 0 Posts
Default

its an LT1.lol



Quick Reply: RPMs increase while on the brake



All times are GMT -5. The time now is 01:05 AM.