LT1-LT4 Modifications 1993-97 Gen II Small Block V8

SEL On. Pulled codes

Thread Tools
 
Search this Thread
 
Old 08-11-2009, 03:55 PM
  #1  
TECH Regular
Thread Starter
 
sdotlog's Avatar
 
Join Date: Jan 2009
Posts: 403
Likes: 0
Received 0 Likes on 0 Posts
Exclamation SEL On. Pulled codes

P0200A injector control circuit
P0506B idle system low-idle air control responding
P1171D fuel system lean during acceleration
P1222D injector control circuiy intermittent

I'm guessing my stock injectors are crapping out?
Old 08-11-2009, 03:59 PM
  #2  
TECH Senior Member
iTrader: (36)
 
ss.slp.ls1's Avatar
 
Join Date: Jan 2008
Location: Orange County, CA
Posts: 8,188
Received 26 Likes on 24 Posts

Default

Check your injectors and all wiring to them. I think it's possible for it to be the PCM as well.
Old 08-11-2009, 10:49 PM
  #3  
TECH Regular
Thread Starter
 
sdotlog's Avatar
 
Join Date: Jan 2009
Posts: 403
Likes: 0
Received 0 Likes on 0 Posts
Default

Alright. I'm going to throw in my 36lb bosch III I bought from fic and fire it up over the weekend as long as I get my tune update for them. I'm guessing these codes came up when my car suddenly died on my couple weeks ago, symptoms of running out of fuel.
Old 08-12-2009, 10:39 PM
  #4  
TECH Regular
Thread Starter
 
sdotlog's Avatar
 
Join Date: Jan 2009
Posts: 403
Likes: 0
Received 0 Likes on 0 Posts
Default

ideas anyone? wiring to the injectors are fine. i cleared the codes couple days ago. and went off this morning. the injector control circuit this time only.
Old 08-13-2009, 12:35 AM
  #5  
TECH Senior Member
iTrader: (36)
 
ss.slp.ls1's Avatar
 
Join Date: Jan 2008
Location: Orange County, CA
Posts: 8,188
Received 26 Likes on 24 Posts

Default

Originally Posted by sdotlog
ideas anyone? wiring to the injectors are fine. i cleared the codes couple days ago. and went off this morning. the injector control circuit this time only.
Try swapping PCM's with a known goog one.

How did you verify the wiring? You can't just look at them...
Old 08-13-2009, 12:48 AM
  #6  
TECH Regular
Thread Starter
 
sdotlog's Avatar
 
Join Date: Jan 2009
Posts: 403
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by ss.slp.ls1
Try swapping PCM's with a known goog one.

How did you verify the wiring? You can't just look at them...
LOL... You got me. Well I'll have to find a good PCM around here. I'm tlsure there a write up where I can test the plugs. Something like a volt meter or so?hopefully I can figure this out by this weekend as I'm throwing on the 36lb injectors in and getting a tune update.
Old 08-16-2009, 02:55 PM
  #7  
TECH Regular
Thread Starter
 
sdotlog's Avatar
 
Join Date: Jan 2009
Posts: 403
Likes: 0
Received 0 Likes on 0 Posts
Default

:\ one thing after another. any method on finding out how to check the wiring?



Quick Reply: SEL On. Pulled codes



All times are GMT -5. The time now is 01:06 AM.