CYL 7 missfire when cold
#1
On The Tree
Thread Starter
Join Date: Aug 2009
Location: Burbank, Ca
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
CYL 7 missfire when cold
like it says in the title. gonna get new plugs because i have NGKTR 55. and reading some of the other threads you guys gap LT1s at like .45 or .40? i have a high RPM surging as its goes past red line. reall bad on the top of second gear. I dont think thats the misfire but its due to the large gaped plugs.
I know its not the opti i just replaced it with the accel unit for 250 i believe. its good buy for anyone that needs a new one.
car misfires but just to the point when i take my foot of the brake to move it starting to surge a little. more annoying that anything. and when it doesnt pull the code or misfire it runs AMAZING! anyne had this problem with this?? all advice is helpful. thank you
97 z28. A4.
BBk 58mm TB
EWP (soon to go in trash)
Long tubes
FIPK
3.73.
and a really big heart!!!
I know its not the opti i just replaced it with the accel unit for 250 i believe. its good buy for anyone that needs a new one.
car misfires but just to the point when i take my foot of the brake to move it starting to surge a little. more annoying that anything. and when it doesnt pull the code or misfire it runs AMAZING! anyne had this problem with this?? all advice is helpful. thank you
97 z28. A4.
BBk 58mm TB
EWP (soon to go in trash)
Long tubes
FIPK
3.73.
and a really big heart!!!