lethal bird

iTrader: (12)

I going to soon be gathering parts for my H/C swap tell me if i missed anything.

Ai 200cc heads
ai 230/238 cam
Ai ported intake
Injectors
new opti
lifters
spec 3+ clutch
spec flywheel
moser 12 bolt, true trac 33 spline, 4.10
nitrous outlet 125 plate kit

RamAir95TA

iTrader: (2)

Pushrods, rockers, tune, timing chain/sprockets, to name the obvious things off the top of my head.

lethal bird

iTrader: (12)

Yea i knew those. I was just going to get the Ai complete cam kit

StealthFormula

iTrader: (35)

Gaskets.

If you are doing the work yourself I would get some assembly lube, thread sealer, RTV, thread chaser kit, oil and filter for an oil change after 100 miles, stuff like that...

Wicked94Z

iTrader: (26)

ditch that crappy truetrac

hitmanws6

iTrader: (20)

Bigger TB

lethal bird

iTrader: (12)

already got an as&m 58mm monoblade

RamAir95TA

iTrader: (2)

Never heard of one of those...

94Z28rag

iTrader: (10)

That would be correct, sir!

lethal bird

iTrader: (12)

excuse me my bad i was in a hurry i didnt mean to put 58mm.

jaycenk

iTrader: (1)

You will need to set up you tps sensor after you get it running so read up on that. You will also need a swear jar and lots of quarters so you can start paying your self for future mods lol.

RamAir95TA

iTrader: (2)

So you have a monoblade? How much did that run you?

lethal bird

iTrader: (12)

$400 I bought it used from a friend of mine. Or is it going to be to much for what i will have. Im still new to all this and im just kinda learning as i go. The guy i bought it from said he only ran it for a little over 3 years and said that i would be fine.