radiator flush procedures??
01-09-2011, 02:09 PM
#1
On The Tree
Thread Starter
Join Date: Jan 2010
Location: richmond, va
Posts: 188
Likes: 0
Received 0 Likes
on
0 Posts
radiator flush procedures?? hey i have a 95 lt1. i wana drain the radiator. my question is how do i drain the overflow tank? or does it all drain when i drain the radiator
01-09-2011, 03:14 PM
#2
On The Tree
Join Date: Dec 2010
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Ive replaced my radiator before
and when i flushed it the radiator was empty
96 z28-bolt ons:
Magnaflow exhaust,(no cats) LT Pacesetter headers, ORY,MSD ignition 6AL, stall converter 2800, and some suspension work.
01-09-2011, 06:56 PM
#3
TECH Apprentice
iTrader: (5)
Join Date: Jan 2007
Location: Hays
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I would just pull the overflow tank out, because this will allow you to flush it out a lot better then if it were still in the car.
To pull it out you will have to pull your battery out. Then there is a single 13 or 15mm bolt holding the tank in. Pull the tank out and unhook the hose that goes back to the radiator. This is very easy to do.
To pull it out you will have to pull your battery out. Then there is a single 13 or 15mm bolt holding the tank in. Pull the tank out and unhook the hose that goes back to the radiator. This is very easy to do.
