Chainsaw_Camaro

Please post pics of how and where you guys put your turbo oil drain. I am trying to figure out the best place on the pan to weld in the bung for the drain. Thanks.

lordrazo

iTrader: (18)

ok here is a pic of mine now the bottom one was from the previous owner and i knew it was too low and wrong angle at least for me so i welded a new -12an bung and then put alittle sealant around then painted heres a few pics



http://s704.photobucket.com/albums/w...t=DSCN0497.jpg

http://s704.photobucket.com/albums/w...t=DSCN0485.jpg

here is a pic on my old stock motor and pan

http://s704.photobucket.com/albums/w...DSCN0106-1.jpg

Chainsaw_Camaro

Thank you that does help. Has anybody put the drain farther back on the side of the pan? The kit I have came with a really nice anodized blue 90 fitting that I can only assume would go on the side of the pan.

kolorzcars

i installed a ati procharger on a lt1 car and they had you puntch a hole in the front drivers corner, then tap the tappered hole with a pipe tap

lordrazo

iTrader: (18)

^^^
ya thats the same thing i did when i had a procharger as you can see in the last link with the stock pan bunched it and threaded it put a npt to barb fiting then jb welded it just in case lol that why with the new turbo and motor i wanted something nice and clean all an fittings