1pissed off TA

did a th400 conversion in a 1995 trans am im building.all the wires that came off the stock shifter in the center counsol.what should i do with them as far as just leaving them unplugged and zip tying them out of my way.does anything need to be spliced together for the neutral and park safety switch?thanks

Big Al

iTrader: (1)

You need to connect those wires to the switch in the new shifter. Or it will start in gear.

Al

86formula

iTrader: (3)

or you can splice them together and not try to start the car in gear. Im the only one who even sits in my drivers seat and ive never tried it

1pissed off TA

splice witch ones together? cuz yor right the car will not even try to start right now because there is no signal stating the car is in park or neutral.sure i could play the guessing game but with electronics i have a habit of burnin **** up.old school here and will rebuild a whole house or car but never want to wire it,i call my buddy even if i need a new radio but will build my own engines.thanks

gregrob

iTrader: (8)

Find which terminals on the stock shifter breaks / makes continuity when in P / Gear and those are the wires you need to splice.

Or just look at a wiring schematic.

In short, call your buddy... lol

Big Al

iTrader: (1)

http://shbox.com/1/starter_charging_95.jpg

Al 95 Z28

1pissed off TA

like i said ,tried to see if anyone knew off hand what to do,i know i can get a test light out or find a schematic.normally if i cannot answer something without making a smart *** coment i do not post.i do not like burning **** up and would rather ask.

1pissed off TA

thanks big al for the input.up and running.