02 sensor help
#1
TECH Apprentice
Thread Starter
Join Date: Feb 2009
Location: Stow Ohio
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
02 sensor help
Just got pacesetter Longtubes, looks like I will need longer 02 sensors or wires. Can I use same o2s and just get an extended wire, or do I need both new sensor and extended wires?
#2
TECH Fanatic
iTrader: (6)
You can keep the old O2s and buy extensions for $40, you can extend them yourself using the solderless kit Pacesetter includes (which I don't recommend), or you can trash everything in the kit except the wire included and solder them yourself in 10 minutes. I marked up and cut the wires (make sure they don't touch) halfway down the sensor to solder the extensions in. I used wire wrap (from the stock spark plug wires I removed while doing the header swap) and electrical tape to make everything neat.
Also, if you bought coated Pacesetters then they're going to foul your O2s in a matter of weeks.
Also, if you bought coated Pacesetters then they're going to foul your O2s in a matter of weeks.
Last edited by Catmaigne; 10-16-2011 at 08:20 PM.