LT4 hot cam results/feelings
01-10-2013, 06:49 PM
#1
On The Tree
Thread Starter
Join Date: Jun 2012
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
LT4 hot cam results/feelings hey guys my dad is thinking about doing an lt4 hot cam kit in his z28, he didnt want something to crazy, and i thought it seemed to be a good choice for him. so anyone running an lt4 hot cam and bolt on's? if so whats some 1/4 mile times, and what kinda power did you make. Thanks guys
01-10-2013, 07:03 PM
#2
you can find it from searching pretty easily.
can expect low 13's to low 12's...depends on alot of things lol.
Power is the same, manuals dyno higher then autos. You looking at probably 300-310rwhp with bolt ons.
can expect low 13's to low 12's...depends on alot of things lol.
Power is the same, manuals dyno higher then autos. You looking at probably 300-310rwhp with bolt ons.
01-10-2013, 07:17 PM
#3
On The Tree
Thread Starter
Join Date: Jun 2012
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
i have done some research, yet from what i found was peoples estimates i just wanted to know if anyone here has a setup with an lt4 hot cam and what experience they have had with roughly the same setup.
01-11-2013, 07:19 AM
#5
I had a HC in the wifes Impala for years and loved it. great sound, great streetable power and great manners. Her car consistantly ran 8.3 to 8.4's in the 1/8th, depending on temps. Granted the car weighs 4200lbs. On 3 different dynos #'s were around 325rwhp. This was through a Performabuilt Lvl 3 trans w/ 3000stall & MT DR's.
With a 100 shot it ran 7.50's. But we drove from Ky to Utah and back getting about 24mpg w/ 3.73's.
But we're doing a 383 not and went custom ground cam to match heads.
With a 100 shot it ran 7.50's. But we drove from Ky to Utah and back getting about 24mpg w/ 3.73's.
But we're doing a 383 not and went custom ground cam to match heads.
01-11-2013, 07:37 AM
#6
TECH Fanatic
iTrader: (8)
Join Date: Aug 2003
Location: Germany
Posts: 1,145
Likes: 0
Received 0 Likes
on
0 Posts
We did a Hotcam on a 96 Z28. Mods were Hot Cam kit (with 1.6 RRs), MAC mid lengths, ORY, Moroso CAI and a SLP 2OTL. Dynoed 330 RWHP and 342 RWTQ SAE after a tune. Do not know what it "runs" at the track but from a roll it keeps up with some mild bolt on LS1s. Oh, the car with only the SLP 2OTL and the Moroso CAI dynoed 263 RWHP and 313 RWTQ on the same dyno, SAE.
