lt1 cutting out or studders from 3800 to 6000
03-12-2013, 07:29 PM
#1
On The Tree
Thread Starter
Join Date: Mar 2013
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
lt1 cutting out or studders from 3800 to 6000 I hope this is in the righ place this time.if not please help.
I have a 94 lt1m6 camaro.as the title states it has began to cutout and buck above 3800rpms.it only does it in 3rd gear and above.it still pulls hard just cuts out.it pulls good between cutting out.does it at half throttle aswell under a pull.fuel pump and filter are fairly fresh.no codes im stumped.i would really aperciate any advice before i start throwi g money at the wrong parts.thank you for any help
I have a 94 lt1m6 camaro.as the title states it has began to cutout and buck above 3800rpms.it only does it in 3rd gear and above.it still pulls hard just cuts out.it pulls good between cutting out.does it at half throttle aswell under a pull.fuel pump and filter are fairly fresh.no codes im stumped.i would really aperciate any advice before i start throwi g money at the wrong parts.thank you for any help
03-13-2013, 11:15 AM
#3
On The Tree
Thread Starter
Join Date: Mar 2013
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Yeah it reves great.just does it when im beatin it after it gets up around 3800 in third.even cruisin down the road at 70 and grab 4th it starts doing it
03-13-2013, 04:03 PM
#4
Teching In
Join Date: Mar 2013
Location: Fresno,CA
Posts: 27
Likes: 0
Received 0 Likes
on
0 Posts
03-13-2013, 07:38 PM
#6
On The Tree
Thread Starter
Join Date: Mar 2013
Posts: 117
Likes: 0
Received 0 Likes
on
0 Posts
Happend all at once im gonna throw plugs wires cap and rotor on it this weekend and a coil if that dont fix it. ill change the opti when i do my le h/c swap in a couple weeks when my taxes get here.