Need help finding this sensor 1993 lt1
#1
Need help finding this sensor 1993 lt1
I cannot find this CKP crank position Sensor for a 1993 LT1 .. called searched does any one ,or have a working one they willing to sell or know where or who can order one through. This is the smaller one not the regular longer type.
#2
A crankshaft position sensor on a 1993 OBD I LT1?
I could be wrong, but I do not believe that LT1's had a crankshaft position sensor until 1996 when they went OBD II.
[FYI - I had a 1995 OBD I LT1 front cover (when I picked up a LT1 engine core) and this cover was missing the hole for the crankshaft position sensor - unlike the 96 / 97 front cover that had the hole for the crankshaft position sensor.]
I could be wrong, but I do not believe that LT1's had a crankshaft position sensor until 1996 when they went OBD II.
[FYI - I had a 1995 OBD I LT1 front cover (when I picked up a LT1 engine core) and this cover was missing the hole for the crankshaft position sensor - unlike the 96 / 97 front cover that had the hole for the crankshaft position sensor.]
#4
pic
Its not letting me upload the pics but use the link and it will go to the pic of what i need its at the bottom
http://www.mastercraft.com/teamtalk/...ad.php?t=58034
http://www.mastercraft.com/teamtalk/...ad.php?t=58034
#5
Is this the original engine in this car and can you take a picture where the sensor goes.
That looks like the crank sensor on my 97 ws6. I can pull it out when i get home to double check.
That looks like the crank sensor on my 97 ws6. I can pull it out when i get home to double check.
#6
I can proab get one tomorrow.. Its a 1993 LT1 vette motor that is in my mastercraft boat.. Yes orig engine that was put in by them in 93 and thats the way they came from factory.
Trending Topics
#8
TECH Fanatic
iTrader: (16)
The 92/93 LT1's do not have a crank position sensor when running a factory ECM. The 92/93 corvette and 93 f-body share the same ECM and there isn't a CPS. Now if you're looking for this sensor in regards to the boat install, you'd have to check with mastercraft as they use a completely different ECM. They also used the Northstar coil packs as opposed to the Opti. I would look to a marina, or mastercraft dealer to make sure they get you the right sensor.