am_muscl

iTrader: (19)

I ask because I have a full set of SRP .40 over -24cc dished pistons with hell fire rings. They have been installed in a block but never been ran. 0 miles. I have no use for them in my nitrous motor setup and they should make around 8.5-9:1 compression depending on the heads. I'm looking for a reasonable offer, for ltx guys I will make a better deal.

myltwon

iTrader: (1)

What rod and stroke are they for?

am_muscl

iTrader: (19)

5.7 rods 3.750 stroke. 355

Kevin Blown 95 TA

You sure about that? 3.75" is 1/4" stroked. You should probably post the catalog number of the pistons.

myltwon

iTrader: (1)

Stock stroke is 3.48

3.75 is for 383 with 4.030 bore iirc

am_muscl

iTrader: (19)

I apologize it's for a 3.48 stroke. Idk where 3.75 came from.

They don't have the exact same part number but these are the closest to what they are.
http://summitracing.com/parts/srp-139633-8

am_muscl

iTrader: (19)

I would take $400 shipped to the lower 48 states. These are $600 pistons originally

am_muscl

iTrader: (19)

I'd drop it down to $350 shipped. I just need these gone, brand new never ran pistons save yourself $250

am_muscl

iTrader: (19)

am_muscl

iTrader: (19)

Nobody's interested?

am_muscl

iTrader: (19)

$300 shipped? I really need these gone, my motor is done I just need some $$ to pay for it. Help a brother out.

mcalus

iTrader: (14)

Damn. I'm in the middle of building one but I might abort the project. Glws.

am_muscl

iTrader: (19)

I'll make a deal if you want them.