93BlackT/A

I have a little issue with valve covers and clearance on my '93 TA. Was wondering if anyone could help? I have AI's 200 heads on with cam and I have an issue with the valve covers not clearing the rockers. Do anyone know of a set of covers that work and are good for this plus having room for the alternator too?

Thanks

93BlackT/A

Anyone?

Huntr1117

iTrader: (18)

Most people just trim the stock covers to clear the rocker arms. Thats what I did

93BlackT/A

There's enough room after you trim? Also what head package did you run? Thanks

Huntr1117

iTrader: (18)

https://www.golenengineservice.com/i...gine-fact-page

Very bottom of the page has a pic and shows where to trim. I'm running stock ported Le2s. I don't think any other head would make a difference.

93BlackT/A

Cool thanks! Was debating getting the Canton's but hear they don't seal well. Will give this a try.

BALLSS

I have always used FelPro gaskets on VC. Trimming the baffles as noted in Golen link is simple with a dermal tool, just clean out any shavings from VC before install