leadfoot4

iTrader: (1)

I have a set of LS1 fuel injectors, been sitting on my shelf for several years. I bought them online, from a shop that I've forgotten, and what I do remember, is at the time, the shop claimed they were interchangeable with LT1 injectors. However, for various reasons, I never used them.

The question still lingers in my mind, if these will indeed work on an LT1, without any issues. Anybody have any experience with this?



TIA!

96capricemgr

iTrader: (1)

Due to the different fuel pressure they are slightly smaller than LT1 injectors but fit.

93M6Formula

Yes they are 28lb with LS fuel pressure (60 PSI I think) and about 24lb with stock LT1 fuel pressure which is 43.5.

lt1-xjs

I have a set of 12561462 myself. There are two sets on ebay, 1 for $165 and 1 @ $199.
Here's the flow test; http://www.thirdgen.org/forums/tpi/3...ml#post2499109

moehorsepower

iTrader: (3)

if they were used and have been sitting, they might be varnished up, so dont be surprised if it starts and runs like crap.

leadfoot4

iTrader: (1)

They were supposedly brand new, and after reading the discussion that was quoted by "lt1-xjs" in post #4, now I'm beginning to wonder. His post jogged my memory, and I did get them from SLP....